BBBRP - ENSEAL SEALER
- MSDS: BBBRP
- Manufacturer: NATIONAL CHEMICAL LABORATORIES
- Product Name: ENSEAL SEALER
- National Stock Number: 8030-00B140002
Product Identification
Product ID:ENSEAL SEALER
MSDS Date:01/01/1987
FSC:8030
NIIN:00B140002
MSDS Number: BBBRP
Responsible Party
PHILADELPHIA, PA 19123
US
Emergency Phone: 215922-1200
Cage: 93607
Contractor
Telephone: 215-922-1200
Cage: 93607
Ingredients
2-(2-METHOXYETHOXY)-ETHANOL
CAS: 111-77-3
RTECS: KL6125000
TRIBUTOXYETHYLPHOSPHATE
CAS: 78-51-3
RTECS: KJ9800000
ACGIH TLV: 3000 MG/KG
DIBUTYL PHTHALATE (SARA III)
CAS: 84-74-2
RTECS: TI0875000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:MAY CAUSE SKIN AND EYE IRRITATION.IF
INGESTED,MAY CAUSE SEVERE GASTRIC DISTRESS AND BLOCKAGE.
First Aid
First Aid:FOR EYES:FLUSH WITH WATER FOR AT LEAST 15 MIN.IF IRRITATION
PERSISTS,GET MEDICAL ATTEN.SKIN:WASH W/SOAP AND
WATER.INGESTION:INDUCE VOMITING,GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TOC
Flash Point:NONE
Extinguishing Media:NONE
Fire Fighting Procedures:AS HEATED MATERIAL MAY LIBERATE TOXIC
FUMES,WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:RECONTAINERIZE BY MOPPING,WET VACUUM,OR
SUITABLE ABSORBENT.RINSE REMAINING MATERIAL TO DRAINS.
Handling
Handling and Storage Precautions:STORE BETWEEN 40 DEG AND 140 DEG F. DO
NOT FREEZE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Ventilation:LOCAL
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:APP.212
Vapor Pres:=TO WATER
Vapor Density:=TO WATER
Spec Gravity:1.020
pH:8.3
Evaporation Rate & Reference:=TO WATER
Solubility in Water:DISPERSES
Appearance and Odor:OPAQUE,WHITE,LIQUID,CHARACTERISTIC ACRYLIC ODOR.
Percent Volatiles by Volume:86
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ACIDS AND OXIDIZERS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON OXIDES AND ACRYLATES.
Disposal
Waste Disposal Methods:FOLLOW LOCAL,STATE,AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.