BBBST - LO-SHEEN ENAMEL WHITE AND PASTEL

  • MSDS: BBBST
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: LO-SHEEN ENAMEL WHITE AND PASTEL
  • National Stock Number: 8010-00B160005
Product Identification

Product ID:LO-SHEEN ENAMEL WHITE AND PASTEL
MSDS Date:05/24/1988
FSC:8010
NIIN:00B160005
MSDS Number: BBBST

Responsible Party
PPG INDUSTRIES INC.
260 KAPPA DRIVE
PITTSBURG, PA 15238
US

Emergency Phone: 304843-1300

Info Phone: 412963-5822

Cage: 92022

Contractor
PPG INDUSTRIES INC.
PITTSBURG, PA 15238 US

Telephone: 412963-5822

Cage: 92022

Ingredients

FILM FORMERS,RESINS,AND ADDITIVES(PROPRIETARY)

Fraction By Weight: 20%


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 20%

ACGIH TLV: 10.00 MG/M3


HYDROTREATED HEAVY NAPHTHA

CAS: 64742-48-9

Fraction By Weight: 30%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INGESTION:HARMFUL OR FATAL IF
SWALLOWED.EYE CONTACT:CAUSES EYE IRRITATION.SKIN:MAY CAUSE MODERATE
SKIN IRRITATION.VAPOR AND SPRAY MIST MAY BE HARMFUL IF INHALED.
Effects of Overexposure:REDNESS,ITCHING,BURNING SENSATION AND VISUAL
DISTURBANCES MAY INDICATE EXCESSIVE EYE
CONTACT.DRYNESS,ITCHING,CRACKING,BURNING,REDNESS,AND SWELLING ARE
CONDITIONS ASSOCIATED WITH EXCESSIVE SKIN CONTACT .

First Aid

First Aid:IF SWALLOWED DO NOT INDUCE VOMITING.IN CASE OF EYE
CONTACT,FLUSH EYES IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.IN CASE OF SKIN CONTACT,REMOVE PROMPTLY BY WIPING,FOLLOWED
BY WATERLESS H AND CLEANER AND SOAP AND WATER.IF INHALED REMOVE TO
FRESH AIR.APPLY ARTIFICIAL RESPIRATION AND OTHER SUPPORT MEASURES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:120 DEG. F
Lower Limits:0.7
Upper Limits:U/I
Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOC.CLASS B
EXTINGUISHERS(CARBON DIOXIDE,DRY CHEMICAL,OR AQUEOUS FILM FORMING
FOAM).
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE.WATER SPRAY MAY
BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP AND
POSSIBLE AUTOIGNITION OR EXPLOSION.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED.ISOLATE
FROM HEAT,ELECTRICAL EQUIPMENT,SPARKS AND OPEN FLAMES.CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION.ONLY PERSONNEL
EQUIPPED WITH PROPER RESPIRATORY AND SKIN AND EYE PROTECTION SHOULD
BE ALLOWED IN AREA.REMOVE ALL SOURCES OF IGNITION.TAKE UP SPILLED
MATERIAL WITH SAWDUST,V ERMICULITE,OR OTHER ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F.STORE
LARGE QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF
NFPA CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM,READ THE MATERIAL SAFETY DATA SHEET(S) FOR THE OTHER
COMPONENT OR COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE
MAY HAVE THE HAZAR DS OF ALL OF ITS PARTS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED (TC-23C-) PAINT SPRAY OR AIR
SUPPLIED (TC-19C-) RESPIRATORS MAY ALSO REDUCE EXPOSURE.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:SPLASH GOGGLES OR FULL FACE SHIELD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING,INCLUDING
IMPERMEABLE APRON&GLOVES CONSTRUCTED OF:NITRILE RUBBER,NEOPRENE
RUBBER/POLYVINYL ALCO
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
AVOID LONG-TERM AND REPEATED CONTACT.THIS PRODUCT CONTAINS TITANIUM
DIOXIDE.IN A LONG TERM STUDY,ANIMALS INHALING TITANIUM DIOXIDE DUST
DEVELOPED LUNG TUMORS.STUDIES WITH HUMANS INVOLVED IN MANUFACTUR E
OF THIS PIGMENT INDICATE NO INCREASEDRISK OF CANCER FROM EXPOSURE.

Chemical Properties

Boiling Pt:B.P. Text:100-242C
Vapor Pres:0.8 MMHG
Vapor Density:>THAN AIR
Spec Gravity:1.29
pH:U/I
Evaporation Rate & Reference:12
Solubility in Water:0.0%
Percent Volatiles by Volume:56.70

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES,STRONG MINERAL ACIDS,OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:HAZ.DECOMP.OCCURS WHEN
HEATED.WELDING,BRAZING,OR FLAME CUTTING SURFACES W/THIS PRODUCT MAY
PRODUCE FUMES-CARBON MONOXID

Disposal

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED
OF THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.DISPOSE OF IN
ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.