Product ID:HULTSCRETE
MSDS Date:01/01/1985
FSC:8040
NIIN:00D000139
MSDS Number: BBCJP

HULTSCRETE CO.

Emergency Phone: 704-376-8484

Cage: DO951

HULTSCRETE CO.

WADESBORO, NC 28170 US

Telephone: 704-272-7641

Cage: DO951

EPOXY RESIN

Fraction By Weight: 40.0%

AROMATIC HYDROCARBON SOLVENTS.

Fraction By Weight: 20.0%

ACGIH TLV: 200 PPM

KETONES.

Fraction By Weight: 21.0%

ACGIH TLV: 100PPM

NON HAZARDOUS INGREDIENTS

Fraction By Weight: 19.0%

Effects of Overexposure:TEMPORARY DAMAGE TO LUNGS,MAY CAUSE PERMANENT
DAMAGE & ENE DEATH,DRUNKNESS W/O SPRAY MASKS.

First Aid:CLOTHES:REMOVE AND WASH IMMEDIATELY. SKIN:WASH
IMMED.W/SOLVENT THEN SOAP & WATER. EYES:FLUSH WITH WATER UNTIL PAIN
CEASES & SEE DR.AS SOON AS POSSIBLE.

Flash Point:73F
Lower Limits:1.0.
Upper Limits:1.8.
Extinguishing Media:FOAM,CO*2 OR DRY CHEMICAL,WATER SPRAY INEFFECTIVE
Fire Fighting Procedures:FIREMEN SHOULD WEAR SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS ARE HIGHLY MOBILE & MAY TRAVEL A
CONSIDERABLE DISTANCE TO SOURCE OF IGNITION & BACK.

Spill Release Procedures:WIPE UP IMMED.WITH DRY RAGS OR POUR SAND ON
SPILL.

Handling and Storage Precautions:KEEP IN COOL PLACE.KEEP OUT OF DIRECT
SUNLIGHT OR HEAT.LEAKING CONTAINERS MUST BE REMOVED TO SAFE PLACE.
Other Precautions:FOR PROFESSIONAL USE ONLY. KEEP OUT OF REACH OF
CHILDREN.

Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS;WEAR MASKS
WHEN SPRAYING.
Ventilation:LOCAL EXHAUST IS RECOMMENDED,SO THAT GASES DO NOT EX.100PPM
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
ITEM IS MADE UP OF 2 PARTS:A & B, & IS PART OF A KIT. PART A IS COVERED
UNDER THIS NSN. PART B IS COVERED SEPARATELY UNDER SAME NSN.
KEY1:F3.

HCC:F3
Boiling Pt:B.P. Text:244.4-291.9
Spec Gravity:1.17
Evaporation Rate & Reference:<1.0,ETHER
Solubility in Water:APPRECIABLE
Appearance and Odor:LIQUID,PAINT ODOR.
Percent Volatiles by Volume:50.0

Stability Indicator/Materials to Avoid:YES
REACTIVE AMINES
Stability Condition to Avoid:FIRE,FLAME,WELDING OR SMIKING IN AREA.
Hazardous Decomposition Products:CHLORINE AT TEMPERATURES OVER 400F.
Conditions to Avoid Polymerization:MIXING W/STRONG REACTIVE
AMINES;BREATHING FUMES.

Waste Disposal Methods:DO NOT SEND TO ANY DUMP UNLESS DUMP OPERATORS
ARE AWARE IT IS FLAMMABLE,EVEN THEN IT SHOULD BE SENT ONLY TO AN
APPROVED DUMP AREA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.