BBCTB - LINDE POLISHING SUSPENSION

  • MSDS: BBCTB
  • Manufacturer: UNION CARBIDE LINDE DIV
  • Product Name: LINDE POLISHING SUSPENSION
  • National Stock Number: 6850-00D000471
Product Identification

Product ID:LINDE POLISHING SUSPENSION
MSDS Date:01/01/1985
FSC:6850
NIIN:00D000471
MSDS Number: BBCTB

Responsible Party
UNION CARBIDE,LINDE DIV.

Emergency Phone: 304-744-3487

Cage: 36396

Contractor
UNION CARBIDE,LINDE DIV.

Cage: 36396

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <40%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


DIISPOROPANOLAMINE

RTECS: UB6600000

Fraction By Weight: <0.5%

ACGIH TLV: NON-LISTED


CARBOXYPOLYMER

Fraction By Weight: <0.5%

ACGIH TLV: NON-LISTED

Hazards

Effects of Overexposure:INHAL./SKIN: IRRITATES & SENSITIZES;INGEST:MAY
BE FATAL OR HARMFUL;EYE:IRRITATES.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR;SKIN/EYES:FLUSH W/WATER.GET
MED.ATTN.IF EYE CONTACT OCCURS; INGEST:INDUCE VOMITING AT ONCE &
CALL A DR.

Fire Fighting

Flash Point:NONE
Unusual Fire/Explosion Hazard:NONE KNOWN

Accidental Release

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT MATERIAL.
LIQUID IS SLIPPERY & MAY CAUSE FALL; WASH THOROUGHLY RESIDUE
REMAINING AFTER MATERIAL HAS BEEN COLLECTED WITH ABSORBENT.

Handling

Handling and Storage Precautions:DONOT SWALLOW-MAY BE HARMFUL OR
FATAL.INDUCE IMMEDIATE VOMITING & OBTAIN MEDICAL TREATMENT;AVOID
EYE CONTACT:MATERIAL IS AN ABRASIVE.
Other Precautions:LIQUID DIFFICULT TO REMOVE & MUST BE FLUSHED W/LARGE
AMTS. OF H*2O.MATERIAL IS WATER SOLUBLE:AVOID DIRECT FUME
INHALATION & PROLONGED SKIN CONTACT.

Exposure Controls

Respiratory Protection:NONE NEEDED
Ventilation:MECHANICAL TYPE RECOMMENDED
Protective Gloves:IN SPECIAL CASE
Eye Protection:OSHA 29CFR 1914.133
Other Protective Equipment:NONE
Supplemental Safety and Health
PH OF SUSPENSION: 8 TO 10.

Chemical Properties

HCC:B3
Appearance and Odor:WHITE LIQUID W/NEGLIGIBLE ODOR
Percent Volatiles by Volume:50

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:NONE KNOWN

Disposal

Waste Disposal Methods:SMALL QUANTITIES:SANITARY SEWER WITH WATER.LARGE
DISPOSAL:DRUM COLLECTION IAW FED,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.