BBDDT - ARON ALPHA CE 480, 490

Product Identification

Product ID:ARON ALPHA CE 480, 490
MSDS Date:01/01/1985
FSC:6520
NIIN:00D000692
MSDS Number: BBDDT

Responsible Party
HOWMEDICA,INC DENTAL LABORATORY PRODUCTS DIV

Emergency Phone: (312) 735-0600

Cage: EO018

Contractor
HOWMEDICA,INC DENTAL LABORATORY PRODUCTS DIV
CHICAGO, IL 60632 US

Telephone: (800) 621-0176

Cage: EO018

Ingredients

ETHYL2-CYANOACRYLATE.

Fraction By Weight: UNK

ACGIH TLV: 4 PPM(PER MFR)


STABILIZERS

Fraction By Weight: <1.0%


UNIDENTIFIED COMPONTS

Fraction By Weight: UNK

Hazards

Effects of Overexposure:MILD LACHRYMATION;MILD TRANSIENT IRRIT OF NASAL
MUCOSA.IMMEDIATE EYE BONDNG,SKIN/MOUTH UPON CONTACT.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:181F-TCC
Extinguishing Media:DRY CHEMICAL OR CO*2
Fire Fighting Procedures:WEAR SCBA & PROTECTV CLOTHING TO PREVENT
CONTACT W/SKIN,EYES
Unusual Fire/Explosion Hazard:ADHESIVE IN ABSORBENT MAY UNDERGO
POLYMRIZATION & CAUSE AN INGREASE IN TEMP WHICH MAY CAUSE AUTOIGN.

Accidental Release

Spill Release Procedures:ELIM IGN SOURCES.USE PROTECTV EQUIPMTS SUCH AS
GLOVES/SAFETY GLASSES;USE CLOTHS TO ABSORB ADHESIV.CLOTHS MAY
UNDERGO AUTOIGNITION.IMMEDIATELY IMMERSE CLOTHS IN PAIL OF H*2O
WHICH WILL CAUSE INSTANT PO LYMERIZATION TO AN INERT SOLID.

Handling

Handling and Storage Precautions:MATERIAL IS CLASSIFIED AS A
COMBUSTIBLE LIQUID.KEEP AWAY FROM HEAT & OPEN FLAME.REFRIGERATE FOR
PROLONGED SHELF LIFE.
Other Precautions:CONTAMINATION OF LIQUID W/ACIDIC OR BASIC
MATL,PEROXIDE OR WATER CAN RESULT IN RAPID POLYMERIZATION
W/UNCONTROLLED RISE IN TEMPERATURE.

Exposure Controls

Respiratory Protection:WEAR NIOSH-APPROVED RESP FOR ORGANIC VAPORS IN
CASE OF LARGE SPILL.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE KNOWN
Supplemental Safety and Health
MSDS FM MFR UNDATED.

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:140-144F
Vapor Pres:.32
Vapor Density:4.34
Spec Gravity:1.2442
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,COLORLESS LIQUID W/PUNGENT ODOR
Percent Volatiles by Volume:<1.0

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATL CAN VIGOROUS REACTION
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.
Conditions to Avoid Polymerization:AVOID ACIDIC,BASIC
MATL,PEROXIDE,H*2O TO PREVENT POLYMRIZION

Disposal

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS. MFR ALSO
SPECIFIED INCINERATION DISPOSAL PROCEDURE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.