Product ID:THERMOTEC 18991 THERMAL SPRAY POWDER
MSDS Date:07/27/1988
FSC:6850
NIIN:00D001096
MSDS Number: BBDVX

WEAR CONTROL TECHNOLOGY INC

40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 212-762-4040

Cage: 1V724

WEAR CONTROL TECH INC

FLUSHING, NY 11358-9981 US

Telephone: 718-762-4040

Cage: 1V724

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9394

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

ACGIH TLV: 10 MG/M3

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF WELDING FUMES MAY
CAUSE NERVOUS SYSTEM AND MUSCLE IRREGULARITIES, IRRITATION OF EYES,
NOSE, THROAT, AND RESPIRATORY SYSTEM, METAL FUME FEVER. CHRONIC:
INHALATION OF FUMES MAY CAUS E CANCER, SIDEROSIS, AND AFFECT LUNG
FUNCTION.
Explanation of Carcinogenicity:CONTAINS NICKEL AND CHROMIUM WHICH ARE
LISTED BY BOTH IARC AND NTP.
Effects of Overexposure:INHALATION: NAUSEA, DIZZINESS, DRYNESS OF NOSE
AND THROAT, COUGHING, WHEEZING AND SHORTNESS OF BREATH. EYES:
REDNESS, TEARING, BLURRED VISION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESUSCITATE IF NEEDED. EYES:
FLUSH WITH PLENTY OF WATER FOR 15 MINUTES. SEE DOCTOR. SKIN: WASH
WITH SOAP AND WATER. INGESTION: DO NOT INDUCE VOMITING. SEE DOCTOR.

Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:METAL POWDER DUST MAY PRESENT A FIRE OR
EXPLOSION HAZARD UNDER FAVORABLE CONDITIONS OF PARTICLE SIZE,
DISPERSION AND STRONG IGNITION SOURCE.

Spill Release Procedures:SWEEP UP OR MOP. PLACE RESIDUE IN A CONTAINER
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:REMOVE ANY COMBUSTIBLES FROM WORK
AREA: SPARKS OR WELDING ARC COULD IGNITE NEARBY COMBUSTIBLES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR WELDING
FUMES OR SUPPLIED AIR RESPIRATOR IN CONFINED SPACES OR WHERE FUME
CONCENTRATION EXCEEDS REGULATORY LIMITS.
Ventilation:USE MECHANICAL OR LOCAL EXHAUST OR BOTH TO MAINTAIN LEVELS
OF FUMES BELOW REGULATORY LIMITS.
Protective Gloves:WELDERS WORK GLOVES
Eye Protection:WELDERS HELMET WITH CORRECT LENSES
Other Protective Equipment:CLOTHING TO PROTECT ENTIRE BODY FROM SPARKS.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
MSDS UNDATED

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:METAL POWDER

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METAL FUMES, FLUORIDES.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.