BBDYM - SPECIALTY/STAINLESS STEELS (GEN INFO)

  • MSDS: BBDYM
  • Manufacturer: INDUSTRIAL ALLOYS INC
  • Product Name: SPECIALTY/STAINLESS STEELS (GEN INFO)
  • National Stock Number: 3439-00D001158
Product Identification

Product ID:SPECIALTY/STAINLESS STEELS (GEN INFO)
MSDS Date:01/01/1987
FSC:3439
NIIN:00D001158
MSDS Number: BBDYM

Responsible Party
INDUSTRIAL ALLOYS, INC.

Emergency Phone: 714-594-7511

Cage: 7D935

Contractor
INDUSTRIAL ALLOYS, INC.

Cage: 7D935

Ingredients

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <35%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: >40%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: <10%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: <10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293


NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: <35%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

Hazards

Effects of Overexposure:IRRIT TO EYES,NOSE,SKIN, OR THROAT. METAL FUME
FEVER W/CHILLS,FEVER.

First Aid

First Aid:INHAL;RMV TO FRESH AIR,GET MED ATTN. SKIN:WASH WELL W/SOAP
&WATER. EYES:FLUSH W/LG AMT OF WATER TO RMV PARTICULATE, GET MED
ATTN. INGEST: UNLIKELY EVENT, BUT GET MED ATTN IF LG AMT OF METAL
IS SWALLOW ED.

Fire Fighting

Flash Point:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:FINE MATL SHOULD BE SWEPT OR VACUUMED. AVOID
USING COMPRESSED AIR TO MANEUVER SPILLS OR LEAKS OF DUSTY MATERIAL
TO AVOID EYE CONTAMINATION.

Handling

Handling and Storage Precautions:MINIMIZE & CONTROL OPERATION PRODUCING
DUST & FUMES. USE GOOD HOUSEKEEPING PRACTICES. KEEP AWAY FM
INCOMPATIBLE MATERIALS.
Other Precautions:STAINLESS STEEL PRODUCTS IN THE FORM SHIPPED ARE NOT
CONSIDERED A HEALTH OR SAFETY HAZARD. DURING SUBSEQUENT PROCESSING
DUST & FUMES MIGHT BE PRODUCED THAT MAY EFFECT WORKERS HEALTH.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESP FOR PRTOECTION AGAINST DUST
& FUMES
Ventilation:MECHANICAL (GEN)& LOCAL EXHAUST VENT FOR AIRBORNE
DUST/FUMES
Protective Gloves:WORK GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:WELDING EQUIP FOR WELDING. PROTECT CLOTHING
AS REQD.
Supplemental Safety and Health
MSDS WAS PROVIDED AS A GENERAL GUIDE TO VARIOUS GRADES PRODUCED. MORE
SPECIFIC INFORMATION ON A PARTICULAR GRADE MAY BE OBTAINED BY
CONTACTING INDUSTRIAL ALLOYS, INC.

Chemical Properties

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:METAL WIRE, ROD, ETC, NO ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES & OXIDIZERS. MOLTEN METAL WILL REACT W/WATER.
Stability Condition to Avoid:AVOID GENERATION OF AIRBORN DUST WHICH
PRESENTS FIRE/EXP HAZ
Hazardous Decomposition Products:METAL FUMES, DUST

Disposal

Waste Disposal Methods:DISPOSE I/A/W APPLICABLE FEDERAL, STATE AND
LOCAL REGULATIONS. SCRAP METAL CAN BE RECLAIMED FOR REUSE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.