BBFHM - CK448A GEAR OIL

  • MSDS: BBFHM
  • Manufacturer: SUNNEN PRODUCTS COMPANY
  • Product Name: CK448A GEAR OIL
  • National Stock Number: 9150-00D001526
Product Identification

Product ID:CK448A GEAR OIL
MSDS Date:08/15/1987
FSC:9150
NIIN:00D001526
MSDS Number: BBFHM

Responsible Party
SUNNEN PRODUCTS COMPANY
7910 MANCHESTER AVE
ST. LOUIS, MO 63143-2712
US

Emergency Phone: (314)781-2105

Preparer: TERRY HELLER,MGR MTLS R&D

Cage: 58436

Contractor
SUNNEN PRODUCTS CO
SAINT LOUIS, MO 63143-2712 US

Telephone: 314-781-2100

Cage: 58436

Ingredients

REFINED MINERAL OIL

Fraction By Weight: >95%

OSHA PEL 5MG/CUM (OIL MIST)

ACGIH TLV: 5MG/CUM (OIL MIST)


OILS,LARD

CAS: 8016-28-2

Fraction By Weight: <5%

Hazards

LD50 LC50 Mixture:LD50 ORAL RAT >15G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYES/SKIN:EXPECTED TO BE
NON-IRRITATING.MAY CAUSE IRRITATION IN SENSITIVE
INDIVIDUALS;INHALATION:NO APPLICABLE INFORMATION
FOUND;INGESTION:NONTOXIC(ESTIMATED)BASED ON TESTING SIMILAR
PRODUCTS. CHRONIC EFFECTS:PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE DERMATITIS (SKIN IRRITATION)
Explanation of Carcinogenicity:MANUFACTURER STATES NON-CARCENOGENIC.

Fire Fighting

Flash Point Method:COC
Flash Point:565F,296C
Lower Limits:0.6
Upper Limits:7.0
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL,WATER FOG
Fire Fighting Procedures:WEAR SCBA FOR FIRES IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:SEALED CONTAINERS MAY LEAK,BURST OR
EXPLODE,RELEASING CONTENTS AND SPREADING FIRE. MATERIAL WILL BURN
IF IGNITED.

Accidental Release

Spill Release Procedures:CONTAIN & ABSORB IN INERT MATERIAL. PLACED IN
SUITABLE DISPOSAL CONTAINER. WARNING:MATERIAL IS GREASY & SLIPPERY.

Handling

Handling and Storage Precautions:IF STORED OUTDOORS,STORE SO AS TO SHED
WATER.DO NOT REUSE CONTAINERS FOR OTHER PURPOSES.ALL LABEL
PRECAUTIONS APPLY TO PARTIALLY FULL OR EMPTY CONTNRS
Other Precautions:DO NOT ATTEMPT TO CLEAN AS RESIDUE IS DIFFICULT TO
REMOVE.DO NOT CUT,WELD,BRAZE,SOLDER,PRESSURIZE CONTAINER,AS DOING
SO MAY CAUSE CONTAINER TO EXPLODE.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR OIL MIST IF TLV
OFF 5MG/CUM IS EXCEEDED.
Ventilation:LOCAL EXHAUST IF TLV IS EXCEEDED.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:APRON.
Work Hygienic Practices:DO NOT WEAR OIL-SOAKED CLOTHING.WASH HANDS
SEVERAL TIMES A DAY.LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
AVOID PROLONGED INHALATION OF MIST OR VAPORS.REMOVE TRACES OF MATERIAL
IF SOLDERING.WELDING,BRAZING,CUTTING OR OTHER PROCESS INVOLVING
IGNITION SOURCES.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:<0.1
Vapor Density:>1
Spec Gravity:0.904
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK GREEN LIQUID
Percent Volatiles by Volume:<1%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT SPARKS,OPEN FLAMES.
Hazardous Decomposition Products:CO FROM COMBUSTION.

Disposal

Waste Disposal Methods:DISPOSE OF IAW FEDERAL,STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.