BBFWQ - IMPCO RC-80/10 VISCOSITY REGULATOR

  • MSDS: BBFWQ
  • Manufacturer: IMPCO INC
  • Product Name: IMPCO RC-80/10 VISCOSITY REGULATOR
  • National Stock Number: 6850-00F000104
Product Identification

Product ID:IMPCO RC-80/10 VISCOSITY REGULATOR
MSDS Date:01/01/1987
FSC:6850
NIIN:00F000104
MSDS Number: BBFWQ

Responsible Party
IMPCO, INC/PROVIDENCE, RI 02908

Emergency Phone: (401) 521-2490

Cage: EO436

Contractor
IMPCO, INC/PROVIDENCE, RI 02908
PROVIDENCE, RI 02908-5612 US

Telephone: 401-521-2490

Cage: EO436

Ingredients

4-METHOXYPHENOL

CAS: 150-76-5

RTECS: SL7700000

Fraction By Weight: <1%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192


QUINONE (SARA III)

CAS: 106-51-4

RTECS: DK2625000

Fraction By Weight: <1%

OSHA PEL 0.1 PPM

ACGIH TLV: 0.1 PPM; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


HYDROXY PROPYL METHACRYLATE

CAS: 923-26-2

RTECS: OZ4750000

Fraction By Weight: 98%


METHACRYLIC ACID

CAS: 79-41-4

RTECS: OZ2975000

Fraction By Weight: 1%

OSHA PEL S, 20 PPM

ACGIH TLV: 20 PPM; 9192

Hazards

Effects of Overexposure:HIGH VAPORS MAY CAUSE EYES IRRITATION & MILD
IRRITATION.

First Aid

First Aid:SKIN: WASH WITH SOAP & WATER. EYES: FLUSH WITH WATER.
INHALATION: REMOVE FROM EXPOSED AREA. INGESTION: INDUCE VOMITING.
CONSULT PHYSICIAN.

Fire Fighting

Flash Point:208F SFCC
Extinguishing Media:FOAM, CO2, DRY CHEMICALS, WATER FOG.
Fire Fighting Procedures:USE WATER SPRAY TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:HEAT CAN CAUSE POLYMERIZATION.

Accidental Release

Spill Release Procedures:DIKE & CONTAIN SPILL WITH INERT MATERIAL
(SAND, EARTH). TRANSFER LIQUID & SOLID DIKI MATERIALS TO SEPARATE
CONTAINERS FOR DISPOSAL. REMOVE CONTAMINATED CLOTNG & WASH AFFECTED
SKIN AREAS WITH WATER. WA SH CLOTHING BEFORE REUSE.

Handling

Handling and Storage Precautions:DON'T STORE UNDER OXYGEN FREE
ATMOSPHERE. LEAVE AIR SPACE OVER LIQUID SURFACE IN ALL CONTAINER
DON'T CUT, PUNCTURE OR WELD EMPTY CONTAINER.
Other Precautions:IN CASE OF SPILLAGE ON CLOTHES, WASH BEFORE REUSE. IF
SPILLED INSIDE OF SHOES, DISCARD CONTAMINATED SHOES. USE WITHIN ONE
YE.

Exposure Controls

Respiratory Protection:NONE AT AMBIENT TEMPERATURE WITH GOOD
VENTILATION EXPOSURE.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
MSDS UNDATED.

Chemical Properties

Boiling Pt:B.P. Text:NONE
Vapor Pres:.05
Vapor Density:>1
Spec Gravity:1.028
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR, COLORLESS LIQUID: ESTER ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING & REDUCING AGENTS.
Stability Condition to Avoid:HEAT, AGING, CONTAMINATION, OXYGEN FREE
ATMOSPHERE.
Conditions to Avoid Polymerization:HEAT, OXIDIZING REDUCING AGENTS.
INERT ATMOSPHERE.

Disposal

Waste Disposal Methods:INCINERATE LIQUID IN APPROVED EQUIPMENT. LAND
FILL CONTAMINATED DIKING MATERIAL ACCORDING TO CURRENT LOCAL STATE
& FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.