BBFYS - APCO 1260HS PART B UNDERCOAT

  • MSDS: BBFYS
  • Manufacturer: APPLIED PLASTICS CO INC
  • Product Name: APCO 1260HS PART B UNDERCOAT
  • National Stock Number: 8010-00F000146
Product Identification

Product ID:APCO 1260HS PART B UNDERCOAT
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000146
MSDS Number: BBFYS

Responsible Party
APPLIED PLASTICS CO., INC.

Emergency Phone: 213/322-8050

Cage: 05866

Contractor
APPLIED PLASTICS CO
EL SEGUNDO, CA 90245 US

Cage: 05866

Ingredients

2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: 25%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9192


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 15%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TOLUENE-2,4-DIISOCYANATE (TDI) (SARA III)

CAS: 584-84-9

RTECS: CZ6300000

Fraction By Weight: <0.5%

OSHA PEL C,0.02 PPM/0.02 STEL

ACGIH TLV: 0.005PPM/0.02STEL;93

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

Effects of Overexposure:SENSITIZATION, ASTHMATIC ATTACKS OR RESPIRATORY
DISTRESS, BRONCHITIS, AND/OR PULMONARY EDEMA

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES. SKIN:
FLUSH WITH WATER, RINSE IN 30% ISOPROPANOL, WASH WITH SOAP AND
WATER. INHALATION: REMOVE FROM AREA IMMEDIATELY TO FRESH AIR.
INGESTION: IN DUCE VOMITING, OBTAIN MEDICAL AID.

Fire Fighting

Flash Point:79F T.C.C.
Lower Limits:1.1
Upper Limits:7.0
Extinguishing Media:CO2 OR DRY CHEMICAL, WATER SPRAY FOR LARGE AREAS
Fire Fighting Procedures:WEAR TOTALLY ENCLOSED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:SOME COMBUSTION PRODUCTS MAY BE TOXIC BY
INHALATION-SEE SECTION VI.

Accidental Release

Spill Release Procedures:AREA AROUND SPILL IS TO BE VENTILATED. COVER
WITH ABSORBENT AND NEUTRALIZE. CAUTION:OR VERY LARGE SPILLS THAT
HAVE BEEN TRANSFERRED TO DISPOSAL RECEPTACLES,HE ADDITION OF
AMMONIA CAN CAUSE CONSIDERABL E HEAT GENERATION.

Handling

Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. DANGER.
HARMFUL IF INHALED, CAUSES EYE IRRITATION. MAY CAUSE INJURY TSKIN
FOLLOWING PROLONGED OR REPEATED CONTACT
Other Precautions:AVOID BREATHING VAPOR. USE WITH ADEQUATE VENTILATION.
AVOID CONTACT WITH EYES. PREVENT PROLONGED OR FREQUENT SKIN
CONTACT. FMMABLE. KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAME.

Exposure Controls

Respiratory Protection:TYPE B CANNISTER GAS MASKS CONTAINING ACTIVATED
CARBON
Ventilation:SUFFICIENT TO MAINTAIN TDI LEVEL BELOW 0.02 PPM.
Protective Gloves:PLASTIC
Eye Protection:GOGGLES
Supplemental Safety and Health
612 E. FRANKLIN AVE., EL SEGUNDO, CALIF. 90245.

Chemical Properties

Boiling Pt:B.P. Text:277F
Vapor Pres:10
Vapor Density:3.66
Spec Gravity:1.12
Evaporation Rate & Reference:<1 BUT.ACET=1
Solubility in Water:REACTS
Appearance and Odor:PALE YELLOW LIQUID, SOLVENT ODOR
Percent Volatiles by Volume: 40

Stability

Stability Indicator/Materials to Avoid:NO
SEE ABOVE
Stability Condition to Avoid:WATER, AMINES, CAUSTICS, ALCOHOLS
Hazardous Decomposition Products:ISOCYANATE VAPORS, CO, N20 AND TRACES
OF HCN
Conditions to Avoid Polymerization:ALIPHATIC AMINES OR OTHER STRONG
BASES

Disposal

Waste Disposal Methods:NEUTRALIZING CHEMICALS: DILUTE AQUEOUS
AMMONIA/GLYCERINE (OR ETHYLENE GLYCOL). NEUTRALIZED SOLID IS
INNOCUOUS AND CAN BE SWEPT UP AND DISPOSED OF BY STANDARD WASTE
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.