BBGLV - INMAC ANTI-STATIC SPRAY

  • MSDS: BBGLV
  • Manufacturer: INMAC
  • Product Name: INMAC ANTI-STATIC SPRAY
  • National Stock Number: 6850-00F000367
Product Identification

Product ID:INMAC ANTI-STATIC SPRAY
MSDS Date:01/01/1985
FSC:6850
NIIN:00F000367
MSDS Number: BBGLV

Responsible Party
INMAC

Cage: 3T092

Contractor
INMAC

Cage: 3T092

Ingredients

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 50 - 70%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 50 - 75%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

Fraction By Weight: 5%

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93

Hazards

Effects of Overexposure:EXCESSIVE INHALATION MAY CAUSE NASAL
IRRITATION. EYES MAY BE PAINFUL FOR A TIME AFTER RINSING OUT.

First Aid

First Aid:IF UNCONSCIOUS, REMOVE VICTIM TO FRESH AIR AND CALL A
PHYSICIAN. EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER. IF
UNCONSCOUS FROM INHALATION DO NOT GIVE ADRENALINE-TYPE DRUGS. THIS
EFFECT WOULD ONLY OCCUR IN CASES OF EXTREME INHALATION.

Fire Fighting

Extinguishing Media:WATER FOG, DRY CHEMICAL, CARBON DIOXIDE, ALCOHOL
FOAM
Fire Fighting Procedures:USE SHIELDING TO PROTECT AGAINST BURSTING
CONTAINERS.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES( >130F)
CONTAINERS MAY VENT, RUPTURE, OR BURST.

Accidental Release

Spill Release Procedures:AVOID BREATHING VAPORS, AVOID SKIN CONTACT
WITH LIQUID. REMOVE IGNITION SOURCES. SOAUP WITH ABSORBENT MATERIAL
AND DISPOSE OF AS WITH OIL- OR GASOLINE-SOAKERAGS.

Handling

Handling and Storage Precautions:DO NOT STORE WHERE TEMPERATURES EXCEED
54'C, 130'F.
Other Precautions:PLEASE READ AND FOLLOW DIRECTIONS ON PRODUCT LABEL;
THEY ARE YOUR BEST GUIDE TO USING THIS PRODUCT IN THE MOST
EFFECTIVE WAYAND GIVE NECESSARY PRECAUTIONS TO PROTECT YOUR HEALTH.

Exposure Controls

Respiratory Protection:MASK MAY BE WORN FOR PROLONGED OR HEAVY SPRAYING
Ventilation:MECHANICAL (GENERAL AREA) SHOULD BE ON WHILE SPRAYING
Protective Gloves:RUBBER, POLYETH
Eye Protection:DO NOT SPRAY TOWARD EYES
Other Protective Equipment:DO NOT WEAR CLOTHING SOAKED BY SPRAY.
Supplemental Safety and Health
2465 AUGUSTINE DRIVE, P.O. BOX 4780, SANTA CLARA, CA

Chemical Properties

Boiling Pt:B.P. Text:N.A.
Vapor Density:>1
Spec Gravity:N.A.
Evaporation Rate & Reference:N.A.
Solubility in Water:1-10%
Appearance and Odor:SOLID CONE WET MIST; CHLOR. SOLVENT ODOR
Percent Volatiles by Volume:99

Stability

Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS
Hazardous Decomposition Products:CARBON MONOXIDE, PHOSGENE,
HYDROCHLORIC ACID.

Disposal

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINERS. GIVE
EMPTY, LEAKING OR FULL CONTAINERS TO A DISPOSAL SERVICE EQUIPPED TO
SAFELY HANDLE AND DISPOSE OF PRESSURIZED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.