BBGMH - DTR607 HOT WEATHER ACRYLIC ENAMEL REDUCER

Product Identification

Product ID:DTR607 HOT WEATHER ACRYLIC ENAMEL REDUCER
MSDS Date:03/26/1992
FSC:8010
NIIN:00F000377
MSDS Number: BBGMH

Responsible Party
PPG IND COATINGS/RESINS/RESEARCH DEV
4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 412-492-5555

Info Phone: 412-492-5555

Cage: EO471

Contractor
PPG IND COATINGS/RESINS/RESEARCH DEV
9 ALLISON PARK, PA 15101 US

Telephone: 412-492-5555

Cage: EO471

Ingredients

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 25-30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC, HIGH FLASH

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 30-35%


HEAVY AROMATIC SOLVENT NAPHTHA PETROLEUM

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: 30-35%


PROPANOIC ACID, 2-METHYL, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 2-5%


7.33

RTECS: 9999999WG

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL OR FATAL.
EYES/SKIN: IRRITATION. INHALATION: HARMFUL, RESPIRATORY SYSTEM
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: HARMFUL OR FATAL. EYES: REDNESS,
ITCHING, BURNING SENSATION & VISUAL DISTURBANCES. SKIN: DRYNESS,
ITCHING, CRACKING, BURNING, REDNESS & SWELLING. INHALATION: EYE
WATERING, HEADACHES, NAUSEA , DIZZINESS, LOSS OF COORDINATION,
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.

First Aid

First Aid:INGESTION: GIVE 1 OR 2 GLASSES OF WATER. DON'T INDUCE
VOMITING. EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 30 MINS. SKIN:
FLUSH W/PLENTY OF WATER, THEN BY WATERLESS HAND CLEANER & SOAP &
WATER. INHALA TION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION & OTHER SUPPORTIVE MEASURES. OBTAIN MEDICAL ATTENTION
IN ALL CASES. HAVE MATERIAL SAFETY DATA SHEET INFORMATION
AVAILABLE.

Fire Fighting

Flash Point Method:PMCC
Flash Point:72F
Lower Limits:1.1%
Extinguishing Media:CO2, DRY CHEMICAL, OR UNIVERSAL AQUEOUS FILM
FORMING FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE WATER
SPRAY TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE. USE SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BUILD UP PRESSURE,
AUTOIGNITE OR EXPLODE WHEN EXPOSED TO EXTREME HEAT. DON'T APPLY TO
HOT SURFACES. ISOLATE FROM IGNITION SOURCES.

Accidental Release

Spill Release Procedures:VENTILATE AREA. ONLY PERSONNEL EQUIPPED
W/PROTECTIVE EQUIPMENT SHOULD BE PERMITTED IN AREA. TAKE UP SPILL
MATERIAL W/SAWDUST, VERMICULITE OR OTHER ABSORBENT MATERIAL & PLACE
INTO CONTAINERS FOR DISPOS AL. REMOVE ALL IGNITION SOURCES.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS
1B FLAMMABLE LIQUIDS. KEEP CONTAINERS TIGHTLY CLOSED
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING CONTENTS CAN BE HARMFUL OR FATAL. GROUND CONTAINERS WHEN
POURING. AVOID FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES.
DON'T APPLY TO HOT S URFACES.

Exposure Controls

Respiratory Protection:USE A NIOSH/MSHA APPROVED (TC-23C) AIR PURIFYING
OR AIR SUPPLIED (TC-19C) RESPIRATOR.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST IN VOLUME & PATTERN TO
KEEP BELOW TLV & REMOVE DECOMPOSITION PRODUCTS.
Protective Gloves:NEOPRENE/NITRILE RUBBER BUTYL/LATEX
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:IMPERMEABLE APRON
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
PERCENT SOLID BY WEIGHT: 0.01

Chemical Properties

Boiling Pt:B.P. Text:110-244C
Vapor Pres:9.4
Vapor Density:>1
Spec Gravity:0.88
Evaporation Rate & Reference:(BU AC = 100): 81
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF SOLVENTS
Percent Volatiles by Volume:100%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, HOT SURFACES, OR
OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. RECYCLE OR DISPOSE EMPTY CONTAINERS AT AN
APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.