Product ID:TYPE M, TYPE V80, TYPE H, TYPE S, PREMIXES
MSDS Date:01/01/1985
FSC:3610
NIIN:00F000461
MSDS Number: BBGRJ

VERSATEC (A XEROX COMPANY)

Emergency Phone: 408/ 988-2800

Cage: EO083

XEROX CORPORATION

ROCHESTER, NY 14644-1877 US

Telephone: 800-828-6571/716-422-2177

Cage: 26921

ISOPAR G

BUTYLMETHACRYLATE RESIN

CAS: 97-88-1

RTECS: OZ3675000

NEOCRYL-VINYL TOLUENE

RTECS: WL5100000

ALUMINUM STEARATE (SEE SUPPLEMENTAL SECTION FOR ADDITIONAL

Effects of Overexposure:POTENTIALLY IRRITATING, NON-SENSITIZING. DIRECT
INHALATION OF FUMES MAY CAUSE IRRITATION.

First Aid:EYES: FLUSH THOROUGHLY WITH WATER. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH SKIN THOROUGHLY WITH SOAP & WATER. INHALATION:
REMOVE FROM EXPOSURE. INGESTION: DILUTE STOMACH WITH SEVERAL
GLASSES OF WATER . CALL POISON CONTROL OR DOCTOR.

Flash Point:102-107F, T.C.C.
Lower Limits:0.8
Upper Limits:7.0
Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER FOG
Fire Fighting Procedures:AVOID WATER, IT TENDS TO SPREAD HYDROCARBON
SOLVENT FIRES.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:REMOVE IGNITION SOURCES. RECOVER FREE LIQUID
USING AN ABSORBENT MATERIAL. USE ADEQUA VENTILATION.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. AVOID HANDLING
NEAR HEAT, STRONG LIGHT, SPARKS, OPEN FLAMES, STRONG OXINTS.
Other Precautions:AVOID BREATHING VAPORS. AVOID PROLONGED OR REPEATED
OR SKIN CONTACT.

Respiratory Protection:NONE
Ventilation:NONE
Protective Gloves:NONE
Eye Protection:NONE
Other Protective Equipment:NEOPRENE OR NITRILE GLOVES ON PROLONGED
CONTACT
Supplemental Safety and Health
PRODUCT ALSO CONTAINS MOLYBDATED CARBON BLACK, DYE, DISPERSING AIDS.

Boiling Pt:B.P. Text:160-177C
Vapor Pres:1
Vapor Density:5.0
Spec Gravity: 0.77
Evaporation Rate & Reference:0.25-0.45, BUAC=1
Solubility in Water:IMMISCIBLE
Appearance and Odor:BLACK LIQUID/ SLIGHT ODOR
Percent Volatiles by Volume:80

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS SUCH AS LIQUID CHLORINE, CONCENTRATED OXYGEN
Stability Condition to Avoid:HEAT, STRONG LIGHT, SPARKS, OPEN FLAMES,
STRONG OXI DANTS
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:HEAT, STRONG LIGHT, SPARKS, OPEN
FLAMES, STRONG OXI DANTS

Waste Disposal Methods:DISPOSE OF LIQUID AND ABSORBENT AT AN APPROVED
DISPOSAL SITE OR FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.