BBGRS - MOLUB-ALLOY 936
- MSDS: BBGRS
- Manufacturer: IMPERIAL OIL AND GREASE CO
- Product Name: MOLUB-ALLOY 936
- National Stock Number: 9150-00F000469
Product Identification
Product ID:MOLUB-ALLOY 936
MSDS Date:01/01/1985
FSC:9150
NIIN:00F000469
MSDS Number: BBGRS
Responsible Party
Emergency Phone: 213/ 478-3577
Cage: 4U543
Contractor
Telephone: 213-679-0271
Cage: 4U543
Ingredients
TRICHLOROETHYLENE (SARA III)
CAS: 79-01-6
RTECS: KX4550000
OSHA PEL 100 PPM/100 STEL
ACGIH TLV: 50 PPM/100,A5STEL;93
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
PETROLEUM LUBRICATING OIL
ACGIH TLV: 5 MG/M3
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 1.5%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:NO DATA.
First Aid
First Aid:RINSE MATERIAL FROM EYES WITH WARM WATER; TREAT EYES WITH
PROPRIETARY EYE WASH SOLUTION. TOXIC POTENTIAL IF INGESTED, DO NOT
INDUCE VOMITING.
Fire Fighting
Flash Point:500F, FLUID COMP
Extinguishing Media:FOAM, CO2
Fire Fighting Procedures:SAME AS FOR PETROLEUM
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:CLEAN UP PROMPTLY BY MECHANICAL MEANS AND
PROPRIETARY OIL-DRYING COMPOUND.
Handling
Handling and Storage Precautions:FOLLOW SAME PROCEDURE AS FOR PETROLEUM
BASE LUBRICATING GREASES. DO NOT STORE AT TEMPERATURES OVE 120F.
Other Precautions:THE NON-FLAMMABLE VOLATILE SOLVENT COMPONENT USED FOR
EASE OF APPLICATION WILL EVAPORATE WITHIN A FEW HOURS FOLLOWING
APPLICION AND IS NOT A SUSTAINING FEATURE OF THE PRODUCT.
Exposure Controls
Ventilation:LOCAL EXHAUST, HIGH TEMPERATURE SERVICE ONLY
Protective Gloves:YES
Eye Protection:NOT REQUIRED
Other Protective Equipment:NONE FOR NORMALLY RECOMMENDED APPLICATIONS.
Supplemental Safety and Health
10906 WILSHIRE BLVD., LOS ANGELES, CA 90024
Chemical Properties
Boiling Pt:B.P. Text:600F
Spec Gravity:1.13
Solubility in Water:SLIGHT
Appearance and Odor:DARK, PLASTIC SOLID, CHLORINATED SOLVENT ODOR.
Percent Volatiles by Volume:TRC.
Stability
Stability Indicator/Materials to Avoid:NO
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXPOSURE TO METALLIC RED HEAT & OPEN
FLAME.
Conditions to Avoid Polymerization:STORAGE AT TEMP ABOVE 120F.
Disposal
Waste Disposal Methods:SOLID CHEMICAL WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.