BBGSY - FLAT BLACK 37038
- MSDS: BBGSY
- Manufacturer: U S PAINT LACQUER AND CHEMICAL CO
- Product Name: FLAT BLACK 37038
- National Stock Number: 8010-00F000493
Product Identification
Product ID:FLAT BLACK 37038
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000493
MSDS Number: BBGSY
Responsible Party
Emergency Phone: 314/ 621-0525
Cage: USPAI
Contractor
Cage: USPAI
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 11.3%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 17.1%
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 18.4%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 13.1%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 31.8%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:EYE & UPPER RESPIRATORY IRRITANT.
First Aid
First Aid:IF EXPOSED TO EXCESS VAPOR, REMOVE TO FRESH AIR AND SEEK
MEDICAL ATTENTION. IF SPLASHED ON SKIN OR IN EYES, FLUSH WITH LARGE
AMOUNTS OF WATER AND SEEK IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Flash Point:32F, T.C.C.
Lower Limits:1.4
Extinguishing Media:DRY CHEMICAL OR FOAM
Unusual Fire/Explosion Hazard:DO NOT EXPOSE TO SPARK OR OPEN FLAME
Accidental Release
Spill Release Procedures:AFFECTED AREA SHOULD BE TREATED WITH AN
ABSORBING COMPOUND AND THEN MATERIAL PLACED A TIGHTLY CLOSED
CONTAINER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM SPARKS, HEAT, AND
FLAMES.
Exposure Controls
Respiratory Protection:BUREAU OF MINES APPROVED MASK FOR REMOVAL OF
PARTICULATE MATTER
Ventilation:SUFFICIENT TO KEEP AIR SUPPLY ABOVE TLV
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES
Other Protective Equipment:HYPERSENSITIVE PERSONS SHOULD USE PROTECTIVE
CREAM
Supplemental Safety and Health
2101 SINGLETON ST. ST. LOUIS, MO 63103. PRODUCT ALSO CONTAINS ISOBUTYL
ALCOHOL 8.(NP9625000).
Chemical Properties
Boiling Pt:B.P. Text:172-288F
Vapor Density:>AIR
Evaporation Rate & Reference:< ETHER
Percent Volatiles by Volume:71.4
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESS HEAT AND/OR OXIDIZING MATERIALS
Disposal
Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
ENVIRONMENTAL CONTROL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.