BBGXC - 51000 NON-FLAM PERMAGRIP

  • MSDS: BBGXC
  • Manufacturer: TECH PRODUCTS CORP
  • Product Name: 51000 NON-FLAM PERMAGRIP
  • National Stock Number: 8040-00F000558
Product Identification

Product ID:51000 NON-FLAM PERMAGRIP
MSDS Date:11/10/1986
FSC:8040
NIIN:00F000558
MSDS Number: BBGXC

Responsible Party
TECH PRODUCTS CORPORATION
5030 LINDEN AVE.
DAYTON, OH 45432

Emergency Phone: (513) 252-3661

Info Phone: (513) 252-3661

Preparer: DAVE KROWIALIS

Cage: 5P059

Contractor
TECH PRODUCTS CORPORATION
DAYTON, OH 45432

Telephone: (513) 252-3661

Cage: 5P059

Ingredients

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


CHLORINATED PETROLEUM SOLVENT

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, REDNESS, TERING,
BLURRED VISION. SKIN: PROLONGED/REPEATED CONTACT CAN CAUSE
IRRITATION, DEFATTING/DERMATITUS. INHALATION: NASAL/RESPIRATORY
IRRITATION, DIZZINESS, FATIGUE, NAUSEA, HE ADACHE, UNCONSCIOUSNESS,
ASPHYXIATION/MYCARDIAL IRRITABILITY. INGESTION: GASTROINTESTINAL
IRRITATION/VOMITING/DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: ASPIRATION OF MATERIAL INTO THE
LUNGS CAN CAUSE CHEMICAL PNEUMONITUS WHICH CAN BE FATAL. SKIN:
PROLONGED/REPEATED CONTACT CAN CAUSE
IRRITATION/DEFATTING/DERMATITUS. OVEREXPOSURE TO SOME COM PONENTS
OF THIS MATERIAL HAS APPARENTLYFOUND TO THE FOLLOWING EFFECTS LIVER
ABNORMALITIES, KIDNEY & LUNG DAMAGE.

First Aid

First Aid:EYES: FLUSH W/LARGE AMTS OF WATER. GET MED ATT. SKIN: WASH
THOROUGHLY EXPOSED AREA W/SOAP & WATER. REMOVE/LAUNDER CONTAMINATED
CLOTHING BEFORE REUSE. INHALATION: REMOVE INDIVIDUAL TO FRESH AIR.
DON'T GIVE STIMULANTS. EPINEPHRINE MAY ADVERSELY AFFECT THE HEART
W/FATAL RESULTS. INGESTION: DON'T INDUCE VOMITING. KEEP PERSON
WARM, QUIET, & GET MED ATTN.

Fire Fighting

Lower Limits:7.0%
Upper Limits:15.0%
Extinguishing Media:USE FOAM, DRY CHEMICAL, CO2, WATER FOG
Fire Fighting Procedures:WEAR SCBA WHEN FIGHTING FIRES. KEEP ADJACENT
CONTAINERS COOL. AVOID SPREADING BURNING LIQUID/WATER USED FOR
COOLING PURPOSES.
Unusual Fire/Explosion Hazard:NONE-HIGH INTENSITY IGNITION SOURCES MAY
IGNITE CONCENTRATED VAPORS. PRODUCT (EVEN JUST RESIDUE) CAN IGNITE
EXPLOSIVELY.

Accidental Release

Spill Release Procedures:SMALL SPILLS: ABSORB LIQUID ON PAPER,
VERMICULITE, FLOOR ABSORBANT OR OTHER MATERIAL/TRANSFER TO HOOD.
LARGE SPILLS: ELIMINATE ALL IGNITION SOURCES. STOP SPILL AT SOURCE,
DIKE AREA OF SPILL TO PREVENT SPREADING, PUMP LIQUID TO SALVAGE
CONTAINERS.

Handling

Handling and Storage Precautions:AVOID CONTACT W/SKIN. KEEP CONTAINERS
COOL/DRY. KEEP CONTAINERS CLOSED WHEN NOT IN USE. CONTAINERS OF
THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTIED.
Other Precautions:WHEN OPENING CONTAINERS, REMOVE TOP SLOWLY TO RELIEVE
ANY PRESSURE BUILD-UP. SINCE EMPTIED CONTAINERS RETAIN RESIDUES
(VAPORS, LIQUIDS, & SOLIDS).

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED, NIOSH APPROVED RESPIRATOR IS
ADVISED. ENGINEERING OR ADMINISTRATIVE CONTROLS SHOULD BE
IMPLEMENTED TO REDUCE EXPOSURE.
Ventilation:PROVIDE LOCAL EXHAUST/MECHANICAL VENTILATION TO KEEP Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY GOGGLES, GLASSES, FACESHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
ALUMINUM ISN'T A ACCEPTABLE MATERIAL FOR CONSTRUCTION FOR PUMPS,
MIXERS, FITTING, STORAGE TANKS.

Chemical Properties

Boiling Pt:B.P. Text:165F
Vapor Pres:100
Vapor Density:4.6
Spec Gravity:1.305
Evaporation Rate & Reference:(N-BU AC = 1): >1

Stability

Stability Indicator/Materials to Avoid:YES
LONG TERM CONTACT W/WATER CAN DEPLETE STABILIZERS FOLLOWED BY SLOW
HYDROLYSIS PRODUCING CORROSIVE ACID. ALUMINUM/ALLOY
Stability Condition to Avoid:HEAT, FLARES, FLAMES, ELECTRICAL
EQUIPMENTS, SPARKS
Hazardous Decomposition Products:CO, CO2 VARIOUS HYDROCARBONS,
PHOSGENE, HYDROGEN CHLORIDE, TOXIC MATERIALS, FORMS HYDROCHLORIC
ACID, METALS.

Disposal

Waste Disposal Methods:DISPOSE OF MATERIAL IN ACCORDANCE W/LOCAL,
COUNT, STATE & FEDERAL REGULATIONS. AS PRODUCED, THIS MATERIAL IS A
PRODUCT & NOT A WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.