BBHQK - RP 3266 HARDENER

  • MSDS: BBHQK
  • Manufacturer: CIBA GEIGY CORP
  • Product Name: RP 3266 HARDENER
  • National Stock Number: 8030-01-126-1431
Product Identification

Product ID:RP 3266 HARDENER
MSDS Date:01/01/1987
FSC:8030
NIIN:01-126-1431
MSDS Number: BBHQK

Responsible Party
CIBA-GEIGY CORP
THREE SKYLINE DRIVE
HAWTHORNE, NY

Emergency Phone: (914) 347-4700

Info Phone: (914) 347-4700

Cage: 02684

Contractor
CIBA SPECIALTY CHEMICALS CORPORATION
EAST LANSING, MI 48823-5691 US

Telephone: 517-351-5900

Cage: 02684

Ingredients

AROMATIC HYDROCARBONS (NO DETECTABLE BENZENE)

CAS: 70955-17-8


TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000


POLYAMIDE OF C18 FATTY ACID DIMERS & TETA

CAS: 68410-23-1


TRIETHYLENE TRETRAMINE POLYMER W/METHYL OXIRANE

CAS: 26950-63-0

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HEATED PRODUCT MAY PRODUCE
INHALABLE VAPORS. SKIN/EYES: IRRITATION & CORROSIVE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DANGER CORROSIVE. CAUSES EYE BURNS, SKIN
IRRITATION AND ALLERGIC SKIN REACTIONS.
Medical Cond Aggravated by Exposure:SKIN AND EYE IRRITATIONS.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MIN. SKIN: WASH WITH SOAP AND
WATER. REMOVE CONTAMINATED CLOTHING & LAUNDER BEFORE RE-USE.
INGESTION: IF CONSCIOUS GIVE LARGE QUANTITIES OF WATER. GET MEDICAL
ATTENTION. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN AND/OR
ARTIFICIAL RESPIRATION. IF NEEDED. CALL A PHYSICIAN.

Fire Fighting

Flash Point Method:CC
Flash Point:193F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, & WATER.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS (SCBA)
AND FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.

Accidental Release

Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL.

Handling

Handling and Storage Precautions:DANGER COMBUSTIBLE, CORROSIVE-CAUSES
EYE BURNS & EYES IRRITATION. KEEP AWAY FROM HEAT & FLAME. DON'T GET
IN EYES. AVOID CONTACT WITH SKIN & CLOTHING.
Other Precautions:NUISANCE DUST MAY BE GENERATED WHEN SANDING OR SAWING
CURED MATERIAL. AVOID BREATHING VAPOR/MIST. KEEP CONTAINER CLOSED.
USE W/ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST.
Ventilation:GENERAL MECHANICAL AND LOCAL EXHAUST.
Protective Gloves:IMPERMEABLE
Eye Protection:WEAR SPLASH-PROOF CHEMICAL GOGGLES
Supplemental Safety and Health

Chemical Properties

Vapor Pres:1.93
Spec Gravity:0.95-0.99
Solubility in Water:SLIGHT
Appearance and Odor:AMBER LIQUID. FINE ODOR
Percent Volatiles by Volume:<10%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, METAL-ORGANIC COMPOUNDS.
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:CO2, CO
Conditions to Avoid Polymerization:HEAT & FLAME

Disposal

Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY WITH LOCAL, STATE & FEDERAL HEALTH AND
ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.