BBJLB - DYKEM SPRAY STEEL BLUE SP-1100

  • MSDS: BBJLB
  • Manufacturer: DYKEM COMPANY
  • Product Name: DYKEM SPRAY STEEL BLUE SP-1100
  • National Stock Number: 8010-00F001498
Product Identification

Product ID:DYKEM SPRAY STEEL BLUE SP-1100
MSDS Date:08/10/1987
FSC:8010
NIIN:00F001498
MSDS Number: BBJLB

Responsible Party
DYKEM COMPANY
8501 DELPORT DRIVE
ST. LOUIS, MI 63114

Emergency Phone: (314) 423-0100

Info Phone: (314) 423-0100

Cage: EO153

Contractor
ITW DYKEM/ DYMON
OLATHE, KS 66061 US

Telephone: 800-443-9536

Cage: 98148

Ingredients

METHYL VIOLET

CAS: 8004-87-3

RTECS: GC8425000

Fraction By Weight: 2%


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 26%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 43%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 4%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


NITROCELLULOSE

CAS: 9004-70-0

RTECS: QW0970000

Fraction By Weight: 5%


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 2%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 20%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192


ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 19%


BUTANE

CAS: 106-97-8

RTECS: EJ4200000

Fraction By Weight: 0.4%

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM; 9192

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:RESPIRATORY, EYE IRRITATION. HIGH
CONCENTRATIONS OF VAPORS MAY PRODUCE HEADACHE, DIZZINESS, & NAUSEA.
PROLONGED OR REPEATED SKIN CONTACT MAY LEAD TO DRYING, IRRITATION,
& DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HEADACHE, DIZZINESS, & NAUSEA.
Medical Cond Aggravated by Exposure:EYE CONTACT CAUSES BURNING &
IRRITATION. REPEATED OR PROLONGED SKIN CONTACT MAY LEAD TO DRYING,
IRRITATION & DERMATITIS.

First Aid

First Aid:EYES & SKIN: FLUSH WITH WATER. INHALATION: REMOVE TO FRESH
AIR. INGESTION: CONTACT PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:57F
Lower Limits:1.4%
Upper Limits:11.1%
Extinguishing Media:CO2, DRY CHEMICAL, OR FOAM
Fire Fighting Procedures:WEAR SCBA. USE WATER SPRAY TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR, MAY TRAVEL
ALONG GROUND, OR MAY BE MOVED BY VENTILATION & IGNITED BY SPARK,
FLAME & OTHER IGNITION SOURCES.

Accidental Release

Spill Release Procedures:WEAR PERSONAL PROTECTIVE EQUIPMENT.
REMOVE-HEAT & IGNITION SOURCES. VENTILATE THE AREA; ABSORB SPILL
WITH INERT MATERIAL.

Handling

Handling and Storage Precautions:STORE COOL & DRY AWAY FROM HEAT,
SPARKS, OR OPEN FLAME.
Other Precautions:USE WITH ADEQUATE VENTILATION. AVOID PROLONGED SKIN
CONTACT.

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED, OR FOR SYPMTOMS OF
OVEREXPOSURE, WEAR NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:LOCAL EXHAUST: NECESSARY UNDER SOME HANDLING OR USE
CONDITIONS.
Protective Gloves:NONE NEEDED
Eye Protection:WEAR GOGGLES, FACE SHIELD
Other Protective Equipment:WEAR NEOPRENE OR CHEMICAL RESISTANT GLOVES &
APRON AS NEEDED TO PREVENT REPEATED OR PROLONGED SKIN CONTACT.
Work Hygienic Practices:USE WITH ADEQUATE VENTILATION.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:167F
Melt/Freeze Pt:M.P/F.P Text:99
Vapor Pres:36
Vapor Density:>1
Spec Gravity:.86
Evaporation Rate & Reference:(BUTYL ACETATE = 1) >1
Solubility in Water:APPRECIABLE
Appearance and Odor:INTENSE BLUE COLOR, SWEET SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID HEAT, SPARKS & OPEN FLAME
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:WASTE MAY BE BURNED IN AN APPROVED INCINERATOR,
OR DISPOSE OF ACCORDING TO LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.