BBJLL - 60 DEG TECHNICAL

  • MSDS: BBJLL
  • Manufacturer: E I DUPONT CHEMICALS
  • Product Name: 60 DEG TECHNICAL
  • National Stock Number: 6810-00F001507
Product Identification

Product ID:60 DEG TECHNICAL
MSDS Date:08/15/1991
FSC:6810
NIIN:00F001507
MSDS Number: BBJLL

Responsible Party
E I DUPONT CHEMICALS
1007 N MARKET ST
WILMINGTON, DE 19898
US

Emergency Phone: 1-800-441-3637

Info Phone: 1-800-441-9442

Cage: EO595

Contractor
E I DUPONT CHEMICALS
WILMINGTON, DE 19898 US

Telephone: 1-800-441-9442

Cage: EO595

Ingredients

SULFURIC ACID

CAS: 7664-93-9

RTECS: WS5600000

Fraction By Weight: 77.7%

OSHA PEL 1 MG/CUM

ACGIH TLV: 1 MG/CUM=IC

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT): 2140 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE: SEVERE IRRITATION & BURNS
TO EYES, SKIN, & MUCOUS MEMBRANES (RESPIRATORY & DIGESTIVE TRACTS).
NOTE: DESTRUCTION OF TISSUE RESULTS WITH DIRECT CONTACT FROM
THERMAL BURNS & DEHYDRATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DISCOMFORT, RASH, ULCERATION. INHALATION:
EROSION OF DENTAL SURFACES, SHORTNESS OF BREATH, DISCOMFORT,
DIFFICULTY BREATHING, SHORTNESS OF BREATH, COUGH. EYES: IRRITATION,
BURNS, TEARING, BLURRED VISION, PERMANENT DAMAGE,
CORNEAL/CONJUNCTIVAL ULCERATION.
Medical Cond Aggravated by Exposure:DISEASES OF THE LUNGS

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR IMMEDIATELY & HAVE PATIENT
LIE DOWN & REMAIN QUIET. APPLY ARTIFICIAL RESPIRATION IF BREATHING
HAS STOPPED. GIVE OXYGEN IF BREATHING IS DIFFICULT. INGESTION:
DON'T INDUC E VOMITING. GIVE LARGE AMOUNTS OF WATER. DON'T
NEUTRALIZE THE ACID. NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS.
EYES/SKIN: FLUSH W/PLENTY OF WATER FOR 15 MINS. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:APPROPRIATE FOR SURROUNDING MATERIAL. USE WATER
SPRAY TO COOL CONTAINERS EXPOSED TO FIRE. DON'T WATER INSIDE
CONTAINERS.
Fire Fighting Procedures:EVACUATE AREA. KEEP UPWIND. WEAR FULL
PROTECTION, SCBA. RUNOFF MAY CAUSE POLLUTION. GENERATES HEAT UPON
WATER ADDITION W/POSSIBLE SPLATTERING. NEUTRALIZE.
Unusual Fire/Explosion Hazard:REACTS W/MOST METALS, ESPECIALLY WHEN
DILUTE, TO GIVE FLAMMABLE, POTENTIALLY EXPLOSIVE HYDROGEN GAS.
CORROSIVE MATERIAL.

Accidental Release

Spill Release Procedures:USE PROTECTION. STOP FLOW. SOAK UP SMALL
SPILLS W/DRY SAND/CLAY/DIATOMACEOUS EARTH. DIKE LARGE
SPILLS/CAUTIOUSLY DILUTE/NEUTRALIZE/TRANSFER TO WASTE WATER
TREATMENT. PREVENT LIQUID FROM ENTERING SEWER S/WATERWAYS/LOW
AREAS. REVIEW SAFETY PRECAUTIONS.
Neutralizing Agent:LIME, SODA ASH

Handling

Handling and Storage Precautions:DON'T BREATHE VAPOR/MIST. AVOID
CONTACT W/EYES/SKIN/CLOTHES. KEEP CONTAINERS CLOSED. DON'T ADD
WATER TO CONTENTS WHILE IN CONTAINER; VIOLENT REACTION.
Other Precautions:LOOSEN TIGHT CLOSURE CAREFULLY. RELIEVE INTERNAL
PRESSURE WHEN RECEIVED/AT LEAST WEEKLY THEREAFTER. DON'T USE
PRESSURE TO EMPTY. SECURELY FASTEN BEFORE MOVING CONTAINER. DON'T
WASH OUT CONTAINER/USE I T FOR OTHER PURPOSES. REPLACE CLOSURE.

Exposure Controls

Respiratory Protection:USE APPROPRIATE NIOSH/MSHA RESPIRATORY
PROTECTION.
Ventilation:GOOD GENERAL VENTILATION TO KEEP VAPOR & MIST
CONCENTRATIONS BELOW THE EXPOSURE LIMITS.
Protective Gloves:ACID-PROOF GAUNTLET
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:APRON, BOOTS, ACID PROOF SUIT & HOOD, LONG
SLEEVE WOOL/ACRYLIC/POLYESTER CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING. LAUNDER SHOES BEFORE REUSE.
Supplemental Safety and Health
NOTE TO PHYSICIAN: CONTINUED WASHING OF THE AFFECTED AREA W/COLD OR
ICED WATER WILL BE HELPFUL IN REMOVING THE LAST TRACES OF SULFURIC
ACID. CREAMS/OINTMENTS SHOULD NOT BE APPLIED BEFORE/DURING THE WA
SHING PHASE OF THE TREATMENT. AVOID FREEZING TISSUES. NOTE: THIS IS
A CORROSIVE MATERIAL.

Chemical Properties

Boiling Pt:B.P. Text:380F/193C
Melt/Freeze Pt:M.P/F.P Text:10F/-12C
Vapor Pres:<0.3
Vapor Density:3.4
Spec Gravity:1.706
pH:<1
Evaporation Rate & Reference:<1
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS TO LIGHT GRAY, OILY; CLEAR TO TURBID
LIQUID, ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
WATER/ALKALINE/METAL/CARBIDE/CHLORATE/FUMINATE/NITRATE/PICRATE/STRONG
OXIDANT/REDUCER/COMBUSTIBLE ORGANICS/METAL POWDER
Stability Condition to Avoid:FIRE, EXTREMELY HIGH TEMPERATURES, SUN,
SPARKS, FLAME TO PREVENT PRESSURE BUILD UP
Hazardous Decomposition Products:SULFUR DIOXIDE & EXPLOSIVE HYDROGEN
GAS UPON REACTION W/MOST METALS

Disposal

Waste Disposal Methods:REPORTABLE DISCHARGE = 1000 LBS. CLEAN-UP
MATERIAL MAY BE RCRA HAZARDOUS WASTE ON DISPOSAL. DON'T FLUSH TO
SURFACE WATER/SANITARY SEWER SYSTEM. COMPLY W/FEDERAL/STATE/LOCAL
REGS. IF APPROVED, NEUTRALI ZE/TRANSFER TO WASTE TREATMENT SYSTEM.
UN 1830.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.