BBJRX - 5 MINUTES EPOXY RESIN

  • MSDS: BBJRX
  • Manufacturer: DEVCON CORP
  • Product Name: 5 MINUTES EPOXY RESIN
  • National Stock Number: 8040-00F001682
Product Identification

Product ID:5 MINUTES EPOXY RESIN
MSDS Date:07/01/1986
FSC:8040
NIIN:00F001682
MSDS Number: BBJRX

Responsible Party
DEVCON CORPORATION
30 ENDICOTT STREET
DANVERS, MA 01923

Emergency Phone: (617) 777-1100

Info Phone: (617) 777-1100

Cage: 16059

Contractor
DEVCON CORP
DANVERS, MA 01923-3753 US

Telephone: 1-508-777-1100

Cage: 16059

Ingredients

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: >60%

Hazards

LD50 LC50 Mixture:LD50 ORAL (RAT): 11.4 G/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. SKIN: MODERATE
SENSITIZER, ALLERGY, & ECZEMA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. SKIN: MODERATE
SENSITIZER, ALLERGY, & ECZEMA.
Medical Cond Aggravated by Exposure:SENSITIZATION & ALLERGY

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINUTES. GET MED ATTN. SKIN: WASH
W/SOAP & WARM WATER. GET MED ATTN. INGESTION: DON'T INDUCE
VOMITING. ADMINISTER 2 GLASSES OF WATER. GET MED ATTN. INHALATION:
REMOVE TO FRE SH AIR. ADMINISTER OXYGEN IF BREATHING IS DIFFICULT.
GET MED ATTN.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>400F
Extinguishing Media:CO2, DRY CHEMICALS, POLYMER FOAMS FOR LARGE FIRES.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SCRAPE UP & DISCARD IN SUITABLE CONTAINERS.
USE ABSORBENT MATERIAL IF NECESSARY. WASH SPILL AREA W/AN
INDUSTRIAL CLEANING AGENT. IF A SOLVENT IS USED FOR CLEANING,

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. HANDLE IN
ACCORDANCE W/THE POTENTIAL HAZARD OF THE CURING AGENT USED. REMOVE
CONTAMINATED CLOTHING & PROTECTIVE GEAR.
Other Precautions:WASH THOROUGHLY AFTER USING, PARTICULARLY BEFORE
EATING/SMOKING. IF CURED MATERIAL IS SANDED OR MACHINED, USE PROPER
PRECAUTIONS.

Exposure Controls

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL: ADEQUATE.
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:1.2
pH:7.0
Solubility in Water:NIL
Appearance and Odor:AMBER LIQUID, FAINT ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS
Stability Condition to Avoid:OPEN FLAME, EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES, ACIDS
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED WITH
EPOXY HARDENER.

Disposal

Waste Disposal Methods:REMOVE TO A WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE W/STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.