BBLCM - PROTECTO COAT 1000 COMP A

  • MSDS: BBLCM
  • Manufacturer: DUDICK CORROSION PROOF INC
  • Product Name: PROTECTO COAT 1000 COMP A
  • National Stock Number: 8030-00F002511
Product Identification

Product ID:PROTECTO COAT 1000 COMP A
MSDS Date:01/01/1987
FSC:8030
NIIN:00F002511
MSDS Number: BBLCM

Responsible Party
DUDICK CORROSION-PROOF, INC/STREETSBORO, OH 44241

Emergency Phone: (216) 562-1970

Cage: DUDIC

Contractor
DUDICK CORROSION-PROOF INC.

Cage: DUDIC

Ingredients

LIQUID EPOXY RESIN (VAPOR PRESSURE = 1.0)

Fraction By Weight: 20%


X-10 EPOXY (VAPOR PRESSURE = 6.0)

Fraction By Weight: 25%

ACGIH TLV: 100 PPM


NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 7.37%

OSHA PEL 100 PPM


2-NITROPROPANE (SARA III)

CAS: 79-46-9

RTECS: TZ5250000

Fraction By Weight: 8.69%

OSHA PEL 25 PPM

ACGIH TLV: 10 PPM, A2; 9293

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Hazards

Effects of Overexposure:NAUSEA, VOMITING, DIARRHEA, HEADACHE,
DIZZINESS, KIDNEY/LIVER DAMAGE, SKIN/EYES IRRITATION.

First Aid

First Aid:INGESTION: DON'T ADMINISTER LIQUIDS OR INDUCE VOMITING. SKIN:
WASH AREA W/SOAP & WATER. EYES: FLUSH W/FLOWING WATER FOR AT LEAST
15 MINUTES. INHALATION: REMOVE VICTIM TO FRESH AIR. IF BREATHING
HAS ST OPPED-RESUSCITATE.

Fire Fighting

Flash Point:40F (TCC)
Lower Limits:0.9%
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR POSITIVE BREATHING APPARATUS. WATER MAY
BE INEFFECTIVE.
Unusual Fire/Explosion Hazard:PRODUCT VAPORS ARE >AIR/MAY BE MOVED BY
SOURCES OF OF IGNITION, IGNITED EXPOSIVELY, FLAMES & SPARKS.

Accidental Release

Spill Release Procedures:WEAR PROPER SAFETY EQUIPMENT. DIKE AREA TO
CONTAIN SPILLAGE. ABSORB EXCESS WITH SANDR EARTH. SCRAPE UP & PLACE
INTO CONTAINER FOR PROPER DISPOSAL.

Handling

Handling and Storage Precautions:AVOID STORAGE IN AREAS OF EXCESSIVE
HEAT OR NEAR POSSIBLE IGNITION SOURCES. KEEP CONTAINERS TITLY
SEALED WHEN NOT IN USE.
Other Precautions:DON'T REUSE EMPTY CONTAINERS. DISPOSAL SHOULD BE IN
ACCORDANCE W/ALL LOCAL, STATE, & FEDERAL REGS. (PROTECTIVE BARRIER
SKIN EAMS APPLIED BEFORE EXPOSURE/AFTER WASHING SKIN OF LIQUID.

Exposure Controls

Respiratory Protection:AT >TLV, USE A CHEMICAL CARTRIDGE RESPIRATOR
W/AN ORGANIC VAPOR.
Ventilation:PROVIDE MECH/LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:RUBBER/NEOPRENE
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:CLEAN, FULL BODY COVERING. EYEWASH & SAFETY
SHOWER.
Supplemental Safety and Health
MSDS DATE: 2/16/87. WT/GAL: 11.44

Chemical Properties

Boiling Pt:B.P. Text:235-286F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:30.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS/PEROXIDES/OXYGEN/NITRIC ACID/SULFUR ACID.
Stability Condition to Avoid:USE OR STORAGE IN AREAS OF HEAT, OR NEAR
SOURCES OF IGNITION
Hazardous Decomposition Products:CO/CO2/ALDEHYDES MAY BE LIBERATED
THROUGH BURNING.

Disposal

Waste Disposal Methods:REMOVE ALL WASTE PRODUCT & CONTAMINATED
MATERIALS TO A DISPOSAL AREA & BURY OR BURN BY ATOMIZING IN A
SUITABLE COMBUSTION CHAMBER. DISPOSAL MUST BE IN COMPLIANCE WITH
ALL LOCAL, STATE, & FEDERAL REGUL ATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.