BBLPQ - THERMOGRIP 6363-15

  • MSDS: BBLPQ
  • Manufacturer: BOSTIK INC
  • Product Name: THERMOGRIP 6363-15
  • National Stock Number: 8040-00F002729
Product Identification

Product ID:THERMOGRIP 6363-15
MSDS Date:04/30/1992
FSC:8040
NIIN:00F002729
MSDS Number: BBLPQ

Responsible Party
BOSTIK INC
BOSTON ST
MIDDLETON, MA 01949
US

Emergency Phone: 508-777-0100

Info Phone: 508-777-0100 OR FAX 508-750-7212

Preparer: D C MOLBERG

Cage: EO689

Contractor
BOSTIK INC.
MIDDLETON, MA 01949 US

Telephone: 978-777-0100/800-227-0332

Cage: 5W425

Ingredients

PARAFFIN WAX FUME, PARAFFIN

CAS: 8002-74-2

RTECS: RV0350000

Fraction By Weight: 2%

OSHA PEL 2 MG/CUM

ACGIH TLV: 2 MG/CUM


BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 4.4%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
HAZARDOUS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION, DIZZINESS, GIDDINESS,
RESPIRATORY IRRITATION, HEADACHE.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE
ARTIFICIAL RESPIRATION, PREFERABLY MOUTH TO MOUTH. IF BREATHING IS
DIFFICULT GIVE OXYGEN. EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST
15 MINS. SKI N: IMMERSE AREA IN COLD WATER. DON'T ATTEMPT TO PEEL
ADHESIVE FROM SKIN. IF PHYSICIAN AGREES, MINERAL OIL MAY PROVE
USEFUL IN SOFTENING THE ADHESIVE AFTER IT COOLS. OBTAIN MED
ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING.

Accidental Release

Spill Release Procedures:IF LIQUID, ALLOW TO HARDEN, THEN SWEEP UP OR
PEEL FROM FLOOR & PACKAGE SOLID PRODUCT IN STEEL DRUMS WHICH ARE IN
GOOD CONDITION. THOROUGHLY CLEAN AREA WHERE SPILL OCCURRED.

Handling

Handling and Storage Precautions:STORE IN A COOL LOCATION (60-80F) AWAY
FROM SUNLIGHT & ANY SOURCE OF HEAT. KEEP CONTAINER TIGHTLY CLOSED
WHEN NOT BEING USED.
Other Precautions:USE W/ADEQUATE VENTILATION. AVOID PROLONGED OR
REPEATED BREATHING OF VAPORS & CONTACT W/SKIN.

Exposure Controls

Ventilation:LOCAL EXHAUST: PREFERRED TO KEEP VAPORS/PARTICULATE BELOW
TLV. MECHANICAL: ACCEPTABLE.
Protective Gloves:CLOTH
Eye Protection:SAFETY GLASSES OR FULL FACE SHIELD
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health

Chemical Properties

HCC:N1
Spec Gravity:0.98
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER SOLID W/LITTLE ODOR.
Percent Volatiles by Volume:0%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:SUNLIGHT OR OTHER SOURCES OF HEAT
Hazardous Decomposition Products:CO2, CO, WATER VAPOR, OXIDES OF
NITROGEN OR A WIDE VARIETY OF INNOCUOUS OR TOXIC FUMES. ACETIC
ACID/ACROLEIN/ALDEHYDES.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.