BBLQB - 443 TITANIUM,CHEMICAL PURE

  • MSDS: BBLQB
  • Manufacturer: RMI TITANIUM CO
  • Product Name: 443 TITANIUM,CHEMICAL PURE
  • National Stock Number: 3439-00F002739
Product Identification

Product ID:443 TITANIUM,CHEMICAL PURE
MSDS Date:02/12/1990
FSC:3439
NIIN:00F002739
MSDS Number: BBLQB

Responsible Party
RMI TITANIUM CO
1000 WARREN AVE
NILES, OH 44446-1168
US

Emergency Phone: 216-544-7655

Info Phone: 216-544-7802

Preparer: MICHAEL C MILLER

Cage: DO815

Contractor
RMI TITANIUM CO
269 NILES, OH 44446-1168 US

Telephone: 216-652-9951

Cage: DO815

Ingredients

TITANIUM (DRY POWDER) (TI)

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: 99%

OSHA PEL TWA 10 MG/CUM DUST

ACGIH TLV: TWA 10 MG/CUM TIO2


SILICA CRYSTALLINE, TRIPOLI (SUSPECTED HUMAN CARCINOGEN BY

CAS: 1317-95-9

RTECS: VV7336000

Fraction By Weight: <1%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: PHYSICAL ABRASION. EYES:
IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Medical Cond Aggravated by Exposure:RESPIRATORY SYSTEM DISORDERS

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT OR
HAS STOPPED, ADMINISTER ARTIFICIAL RESPIRATION OR OXYGEN AS
INDICATED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:USE EXTINGUISHERS DESIGNED FOR METAL FIRES, DRY
CHEMICAL POWDERS, SALTS OR INERT GASES.
Fire Fighting Procedures:DON'T USE WATER OR LIQUID.
Unusual Fire/Explosion Hazard:GRINDING/POLISHING IN ABSENCE OF OXYGEN
CAN RESULT IN WASTE WHICH IS EASILY IGNITED W/A FLASH/SPARK. WATER
CAN CAUSE AN EXPLOSION DUE TO HYDROGEN GAS EVOLUTION.

Accidental Release

Spill Release Procedures:COLLECT MATERIAL IN APPROPRIATELY LABELED
CONTAINERS & DISPOSE OF PROPERLY. DON'T USE COMPRESSED AIR TO CLEAN
SPILLS OF THE DUST. WEAR PROTECTIVE EQUIPMENT.

Handling

Handling and Storage Precautions:KEEP WORK AREAS FREE OF WASTE. STORE
WET & KEEP AWAY FROM HEAT & OPEN FLAME-MAINTAIN HUMIDITY >50% TO
PREVENT ELECTROSTATIC BUILD-UP.
Other Precautions:NO SMOKING IN AREA. USE NON-SPARKING METAL EQUIPMENT.

Exposure Controls

Respiratory Protection:RESPIRATOR RECOMMENDED FOR ALL GRINDING,
CUTTING, ETC. CONSULT LOCAL SUPPLIER FOR SELECTION OF APPROPRIATE
NIOSH/MSHA APPROVED RESPIRATOR BASED ON MAGNITUDE & DURATION OF
EXPOSURE.
Ventilation:ADEQUATE GENERAL &/OR LOCAL EXHAUST VENTILATION
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING
Supplemental Safety and Health
PRODUCTS UNDER NORMAL CONDITIONS DON'T PRESENT AN
INHALATION/INGESTION/CONTACT HEALTH HAZARD. HOWEVER, OPERATIONS,
SUCH AS BURNING/WELDING/BRAZING/GRINDING/MACHINING, WHICH RESULTS
IN ELEVATING THE TE MP OR ABOVE ITS MELTING POINT OR RESULTS IN THE
GENERATION OF AIRBORNE PARTICULATES, MAY PRESENT HEALTH HAZARDS.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:1560-1840C
Appearance and Odor:GRAY METALLIC SOLID; NO ODOR

Stability

Stability Indicator/Materials to Avoid:YES
WHEN IN CONTACT W/RED FUMING NITRIC ACID MAY BECOME SENSITIVE TO, &
REACT VIOLENTLY W/THE ACID.
Stability Condition to Avoid:STABLE AT ROOM TEMPERATURE UNDER NORMAL
STORAGE & HANDLING CONDITIONS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.