BBLRH - SR-47,PAINT & POLYSULFIDE REMOVER

  • MSDS: BBLRH
  • Manufacturer: ELDORADO CHEMICAL CO INC
  • Product Name: SR-47,PAINT & POLYSULFIDE REMOVER
  • National Stock Number: 8010-00F002765
Product Identification

Product ID:SR-47,PAINT & POLYSULFIDE REMOVER
MSDS Date:02/21/1990
FSC:8010
NIIN:00F002765
MSDS Number: BBLRH

Responsible Party
ELDORADO CHEMICAL CO INC
14350 LOOKOUT RD
SAN ANTONIO, TX 78265-4837
US

Emergency Phone: 210-653-2060

Info Phone: 210-653-9323 OR FAX 210-653-0825

Preparer: PAT E SMITH

Cage: 55208

Contractor
ELDORADO CHEMICAL COMPANY, INC.
34837 SAN ANTONIO, TX 78265-4837 US

Telephone: 800-531-1088/ 210-653-2060

Cage: 55208

Ingredients

DICHLOROMETHANE (METHYLENE CHLORIDE) (SUSPECTED HUMAN

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 75%

OSHA PEL 500 PPM

ACGIH TLV: 174 MG/CUM (A2)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


AMMONIUM HYDROXIDE, AQUA AMMONIA

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: 4%

ACGIH TLV: 25 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ETHANOL (ETHYL ALCOHOL), TECSOL, ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 10%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NARCOSIS, NAUSEA,
DIZZINESS. SKIN: CORROSIVE. EYES: BLURRY VISION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:SKIN: DEFATTING & IRRITATION.

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: FLUSH W/WATER; WASH
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:NONE
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CAUSES TOXIC CHLORIDE FUMES ON CONTACT
W/OPEN FLAME. AUTOIGNITION TEMP: 1200F.

Accidental Release

Spill Release Procedures:RINSE W/WATER.

Handling

Handling and Storage Precautions:DON'T USE IN CONFINED SPACES.

Exposure Controls

Respiratory Protection:USE SCBA IF LIMITS ARE EXCEEDED
Ventilation:100 FT/MIN
Protective Gloves:POLYETHYLENE
Eye Protection:FACE SHIELD & GOGGLES
Other Protective Equipment:RUBBER APRON & BOOTS
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:115F
Vapor Pres:380
Vapor Density:2.9
Spec Gravity:1.2
pH:11-12
Evaporation Rate & Reference:(WATER = 1): 1
Solubility in Water:PARTIAL
Appearance and Odor:THICK, GREEN LIQUID W/AMMONIA ODOR.
Percent Volatiles by Volume:80%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIS, STRONG ACIDS, STRONG OXIDIZERS, REACTIVE METALS
Stability Condition to Avoid:OPEN FLAME
Hazardous Decomposition Products:HEAT WILL PRODUCE DICHLOROMETHANE &
AMMONIA FUMES

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. USEPA HAZARDOUS WASTE NO: U080.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.