BBLRK - KRYLON CRYSTAL CLEAR 1302

  • MSDS: BBLRK
  • Manufacturer: BORDEN INC KRYLON DEPT
  • Product Name: KRYLON CRYSTAL CLEAR 1302
  • National Stock Number: 8010-00F002767
Product Identification

Product ID:KRYLON CRYSTAL CLEAR 1302
MSDS Date:01/25/1985
FSC:8010
NIIN:00F002767
MSDS Number: BBLRK

Responsible Party
BORDEN INC., KRYLON DEPT
FORD & WASHINGTON
NORRISTOWN, PA 19404
US

Emergency Phone: (215) 278-2400

Info Phone: (215) 278-2456

Preparer: CASS

Cage: EO688

Contractor
KRYLON PRODUCTS
SOLON, OH 44139 US

Telephone: 800-832-2541/216-566-2917

Cage: 87187

Ingredients

AROMATIC HYDROCARBON SOLVENT NAPTHA (AROMATIC 150)

CAS: 64742-94-5

Fraction By Weight: 2.12%

OSHA PEL 210 PPM

ACGIH TLV: 210 PPM


ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 11.2%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 12.9%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192


ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 17.1%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 1000 PPM


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 11.1%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


N-HEPTANE

CAS: 142-82-5

RTECS: MI7700000

Fraction By Weight: 22.4%

OSHA PEL 500 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9293


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 15.8%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CENTRAL NERVOUS SYSTEM
DEPRESSION, HEADACHE, DIZZINESS, NAUSEA, VOMITING, UNCONSCIOUSNESS,
ASPHYXIATION, CYANOSIS. RESPIRATORY DISTRESS, LIVER & KIDNEY
DAMAGE, PERMANENT BRAIN & NERVOUS SY STEM DAMAGE. SKIN/EYES:
IRRITATION.
Explanation of Carcinogenicity:METHYLENE CHLORIDE IS AN A2 CARCINOGEN
BY ACGIH.
Effects of Overexposure:INHALATION: PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. CENTRAL NERVOUS SYSTEM DEPRESSION, HEADACHE, NAUSEA,
DIZZINESS, VOMITING, UNCONSCIOUSNESS, ASPHYXIATION, CYANOSIS
RESPIRATORY DISTRESS, LIVER & KID NEY DAMAGE. SKIN/EYES:
IRRITATION.

First Aid

First Aid:INGESTION: DILUTE BY DRINKING LARGE QUANTITIES OF WATER. GET
MED ATTN. INHALATION: REMOVE TO FRESH AIR IF NOT BREATHING GIVE
ARTIFICIAL RESPIRATION, PREFERABLY MOUTH-TO-MOUTH. IF BREATHING IS
DIFFICUL T GIVE OXYGEN. CALL PHYSICIAN. SKIN: FLUSH W/WATER. CALL
PHYSICIAN. EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.

Fire Fighting

Flash Point:FLAMMABLE
Extinguishing Media:DRY CHEMICAL, FOAM, CO2, WATER
Fire Fighting Procedures:IF VAPORS COLLECT IN A CONFINED AREA IT MAY
IGNITE. SPRAY MAY CATCH FIRE & BURN LIKE A BLOWTORCH. WATER MAY BE
INEFFECTIVE. BUT USE TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE, EXPOSURE TO HIGH
TEMPERATURE MAY CAUSE BURSTING. AVOID RADIATORS, STOVES, DIRECT
SUNLIGHT/ HEAT SOURCE. DON'T PUNCTURE/INCINERATE.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. SOAK UP WITH
ABSORBENT MATERIAL. REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
ENTRY INTO NATURAL BODIES OF WATER.

Handling

Handling and Storage Precautions:DON'T STORE AT TEMPERATURES OVER 120F.
HIGH TEMP MAY CAUSE BURSTING. AVOID RADIATORS, STOVES, DIRECT
SUNLIGHT OR OTHER AT SOURCE. AVOID SKIN CONTACT.
Other Precautions:INCINERATION WILL CAUSE CONTAINER TO BURST VIOLENTLY
USE ONLY STRONG, CLOSED INCINERATORS. AVOID PUNCTURING. IF SPRAY IS
BURNED DON'T BREATHE IRRITATING/TOXIC FUMES. AVOID EYE CONTACT &
UNNECESSARY EX POSURE. REMOVE MATERIAL FROM CLOTHING.

Exposure Controls

Respiratory Protection:WHERE AIR CONTAMINANTS CAN EXCEED ACCEPTABLE
CRITERIA USE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION EQUIPMENT
RESPIRATORS SHOULD BE SELECTED BASED ON THE FORM & CONCNETRATION OF
CONTAMINANTS IN AIR I N ACCORDANCE W/OSHA STANDARDS.
Ventilation:SUFFICIENT VENTILATION IN VOLUME & AIR FLOW PATTERNS SHOULD
BE PROVIDED TO KEEP AIR CONTAMINANT LEVELS Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. HANDLE IN
ACCORDANCE W/GOOD INDUSTRIAL HYGIENE & SAFETY PRACTICES.
Supplemental Safety and Health

Chemical Properties

Vapor Density:> 1
Spec Gravity:< 1
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR PAINT. CONTAINER UNDER INTERNAL PRESSURE OF
60 POUNDS PER SQUARE INCH
Percent Volatiles by Volume:94%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPS >120F, RADIATORS, STOVES, DIRECT
SUNLIGHT, PUNCTURING.
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE, & FEDERAL
REGULATIONS. EMPTY CONTAINER MAY CONTAIN EXPLOSIVE VAPORS. DON'T
CUT, PUNCTURE/WELD ON OR NEARBY. INCINERATION WILL CAUSE CONTAINER
TO BURST VIOLENTLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.