BBMBJ - WHITE LUBE

  • MSDS: BBMBJ
  • Manufacturer: OXFORD CHEMICALS INC
  • Product Name: WHITE LUBE
  • National Stock Number: 7930-00F002942
Product Identification

Product ID:WHITE LUBE
MSDS Date:08/12/1985
FSC:7930
NIIN:00F002942
MSDS Number: BBMBJ

Responsible Party
OXFORD CHEMICALS INC
ATLANTA, GA 30366
US

Emergency Phone: 404-452-1100

Info Phone: 404-452-1100

Preparer: LOUISE MOORE

Cage: 06645

Contractor
OXFORD CHEMICALS INC
ATLANTA, GA 30366 US

Telephone: 404-452-1100

Cage: 06645

Ingredients

PETROLEUM DISTILLATE, PETROLEUM OIL, BASE OIL

CAS: 8002-05-9

RTECS: SE7175000

OSHA PEL 5 MG/CUM MIST

ACGIH TLV: 5 MG/CUM MIST


METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE) (CHLOROTHENE NU),

CAS: 71-55-6

RTECS: KJ2975000

OSHA PEL 350 PPM

ACGIH TLV: 1910 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


LITHIUM GREASE

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. SKIN: WASH W/SOAP &
WATER. INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO
FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:FLAMMABLE

Accidental Release

Spill Release Procedures:SOAK UP ON APPROPRIATE ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:DON'T STORE WHERE TEMPERATURE EXCEEDS
120F.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NONE REQUIRED AS LONG AS NOT USED IN SMALL
CLOSED AREA.
Ventilation:GENERAL VENTILATION IS ADEQUATE.
Eye Protection:GOGGLES
Supplemental Safety and Health

Chemical Properties

Vapor Pres:34 PSIG
Spec Gravity:1.195
Solubility in Water:NEGLIGIBLE
Appearance and Odor:THICK LIQUID, TAN TO YELLOW, MILD SWEETISH ODOR
Percent Volatiles by Volume:80%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPERATURES >120F
Hazardous Decomposition Products:TRACE AMOUNTS OF PHOSGENE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. CONTENTS UNDER PRESSURE. DON'T PUNCTURE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.