BBMFQ - WOODTONE GLAZE WD200 SERIES

  • MSDS: BBMFQ
  • Manufacturer: DUNCAN ENTERPRISES
  • Product Name: WOODTONE GLAZE WD200 SERIES
  • National Stock Number: 8010-00F003006
Product Identification

Product ID:WOODTONE GLAZE WD200 SERIES
MSDS Date:01/01/1992
FSC:8010
NIIN:00F003006
MSDS Number: BBMFQ

Responsible Party
DUNCAN ENTERPRISES
5673 E SHIELDS AVE
FRESNO, CA 93727-7819
US

Emergency Phone: 209-445-1222

Info Phone: 209-291-4444

Preparer: CURT SATHRE

Cage: 21546

Contractor
DUNCAN ENTERPRISES
FRESNO, CA 93727 US

Telephone: 209-291-4444

Cage: 21546

Ingredients

SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


LEAD COMPOUNDS

Fraction By Weight: <15%

OSHA PEL 0.05 MG/CUM

ACGIH TLV: 0.15 MG/CUM


BARIUM COMPOUNDS

Fraction By Weight: <5%

OSHA PEL 0.5 MG/CUM

ACGIH TLV: 0.5 MG/CUM


ALKALI BOROSILICATE FRITS *93-1*

CAS: 65997-18-4

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ABRASIVE, CAN SCRATCH EYES.
OVEREXPOSURE TO LEAD MAY CAUSE NERVOUS SYSTEM, KIDNEY, OR BONE
MARROW DAMAGE OR HARM TO THE DEVELOPING FETUS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:WEIGHT LOSS, STOMACH CRAMPS, LOSS OF
COORDINATION, JOINT & MUSCLE PAINS.

First Aid

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Fire Fighting Procedures:NONE. WILL NOT BURN.

Accidental Release

Spill Release Procedures:CLEAN UP PROPERLY W/PAPER TOWELS & WET
SPONGES.

Handling

Handling and Storage Precautions:WHEN USING, DON'T EAT, DRINK, OR
SMOKE. KEEP SEALED. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID USING IF PREGNANT OR CONTEMPLATING PREGNANCY.
IF GLAZE SPRAYING REGULAR BLOOD LEAD LEVEL TESTING IS ADVISABLE.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED DUST & MIST RESPIRATOR FOR
LEAD SUCH AS 3M 8710 OR EQUIVALENT.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING.
Eye Protection:REQUIRED.
Other Protective Equipment:PROTECTIVE CLOTHING, SPRAY BOOTH IF IN THE
GLAZE FORM & APPLYING BY SPRAY
Work Hygienic Practices:WASH THOROUGHLY, IMMEDIATELY AFTER SPRAYING.
CLEAN SPRAY BOOTH FILTERS OFTEN.
Supplemental Safety and Health
FRITS ARE PRODUCED FROM THE CHEMICAL REACTIONS WHICH OCCUR DURING THE
HIGH TEMPERATURE SMELTING OF VARIOUS RAW MATERIALS TO FORM A MOLTEN
GLASS. THIS GLASS IS RAPIDLY COOLED & THEN GROUND TO PRODUCE P
OWDERED FRIT. EXPOSURE TO LEAD IS POSSIBLE IF IT DISSOLVES OUT OF
THE GLASS (OCCURS VERY SLOWLY).

Chemical Properties

Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:1800F
Spec Gravity:1.7
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED LIQUID, ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.