BBMGF - T-3 THINNER

Product Identification

Product ID:T-3 THINNER
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003015
MSDS Number: BBMGF

Responsible Party
PORTER PAINT LOUISVILLE, KY 40203

Emergency Phone: (502) 588-9200

Cage: EO709

Contractor
PORTER PAINT LOUISVILLE, KY 40203
LOUISVILLE, KY 40203-1714 US

Telephone: 502-588-9651

Cage: EO709

Ingredients

DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 50%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 25%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PROPYLENE GLYCOL MONOMETHYL ETHER

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 25%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

Hazards

Effects of Overexposure:INHALATION: IRRITATION OF THE RESPIRATORY
TRACT: HEADACHE, DIZZINESS OR NAUSEA.

First Aid

First Aid:VAPORS: REMOVE FROM EXPOSURE. KEEP WARM/QUIET/NOTIFY
PHYSICIAN. EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
AFFECTED AREAS WITH WATER. REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:84F
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA. KEEP CONTAINERS TIGHTLY CLOSED.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. MAY BE USED TO COOL CONTAINERS.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES/HOT
SURFACES/ELECTRICAL/STATIC OR FRICTION SPKS). AVOID BREATHING
VAPORS. WEAR APPROVED (NIOSH OR MHSA) RESPIRATOR & NTILATE AREA.
REMOVE W/INERT ABSORBANT SUCH AS SAND/KITTY LITTER, ETC.

Handling

Handling and Storage Precautions:KEEP CONTAINERS UPRIGHT TO PREVENT
LEAKAGE. CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID EE FALL
OF LIQ IN EXCESS OF A FEW INCHES.
Other Precautions:DON'T STORE ABOVE 120F. DON'T TAKE INTERNALLY. BEFORE
SMOKING OR EATING, WASH HANDS THOROUGHLY. DON'T GET IN EYES OR ON
SKINAVOID BREATHING VAPORS OR SPRAY MIST.

Exposure Controls

Respiratory Protection:IN CONFINED AREA, USE NIOSH/MHSA AIR-LINE
RESPIRATORS AND HOOD.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV/LEL.
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:SAFETY SPLASH GUARDS
Other Protective Equipment:AS NEEDED-USE BODY PROTECTION, SUCH AS
RUBBER APRON, ETC.
Supplemental Safety and Health
WEIGHT PER GALLON: 7.65 LBS.

Chemical Properties

Boiling Pt:B.P. Text:276-337F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES MAY PRODUCE CO2 & CO.

Disposal

Waste Disposal Methods:DISPOSE OF IN A SAFE MANNER IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS THAT APPLY TO INCINERATION OR
SECURE LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.