BBNFV - 5717S METAL TREATMENTS, LACQUER REMOVER, PAINT REMOVER

  • MSDS: BBNFV
  • Manufacturer: EI DUPONT AUTOMOTIVE PRODS DEPT
  • Product Name: 5717S METAL TREATMENTS, LACQUER REMOVER, PAINT REMOVER
  • National Stock Number: 8010-00F003535
Product Identification

Product ID:5717S METAL TREATMENTS, LACQUER REMOVER, PAINT REMOVER
MSDS Date:01/01/1991
FSC:8010
NIIN:00F003535
MSDS Number: BBNFV

Responsible Party
EI DUPONT/AUTOMOTIVE PRODS DEPT
1007 MARKET ST BRANDYWINE BLDG 3332
WILMINGTON, DE 19898
US

Emergency Phone: (800) 441-3637

Info Phone: (800) 441-7515

Cage: EO478

Contractor
EI DUPONT/AUTOMOTIVE PRODS DEPT
WILMINGTON, DE 19898 US

Telephone: (800) 441-7515

Cage: EO478

Ingredients

ETHYLENEGLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE

CAS: 112-07-2

RTECS: KJ8925000

Fraction By Weight: 15%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM


PHOSPHORIC ACID

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: 32%

OSHA PEL 1 MG/CUM

ACGIH TLV: 1 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000


8.68-9.66

RTECS: 9999999WG

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: GASTROINTESTINAL DISTRESS.
INHALATION: NOSE/THROAT IRRITATION, EYE WATERING, HEADACHES,
NAUSEA, DIZZINESS, LOSS OF COORDINATION. EYES: IRRITATION OR
BURNING. SKIN: IRRITATION W/DISCOMFORT & DERMATITIS. HARMFUL
ABSORPTION CAUSINGINJURY TO KIDNEYS, LIVER, BLOOD AND/OR BONE
MARROW.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: GASTROINTESTINAL DISTRESS.
INHALATION: PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. EYES:
IRRITATION OR BURNING. SKIN: IRRITATION W/DISCOMFORT & DERMATITIS.
HARMFUL ABSORPTION CAUSING INJURY TO KIDNEYS, LIVER, BLOOD AND/OR
BONE MARROW.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP & WATER. INGESTION:
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:CC
Flash Point:>200F
Lower Limits:0.9%
Upper Limits:25%
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIP & SCBA. USE WATER
FROM FOG NOZZLES TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE
BUILD UP.
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE THE FLASH POINT, EMITS
FLAMMABLE VAPORS WHICH, WHEN MIXED W/AIR, CAN BURN/EXPLODE. FINE
MISTS/SPRAYS MAY BE FLAMMABLE AT TEMPS

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE SOURCES OF IGNITION.
WEAR PROTECTIVE EQUIPMENT. CONFINE & REMOVE W/INERT ABSORBENT.

Handling

Handling and Storage Precautions:OBSERVE LABEL PRECAUTIONS. KEEP AWAY
FROM HEAT, SPARKS & FLAME. CLOSE CONTAINER AFTER EACH USE. GROUND
CONTAINERS WHEN POURING.
Other Precautions:DON'T SAND, FLAME CUT, BRAZE OR WELD DRY COATING
W/OUT A NIOSH/MSHA APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.
DON'T PERMIT ANYONE W/OUT PROTECTION IN THE PAINTING AREA. DON'T
BREATHE VAPORS OR M ISTS.

Exposure Controls

Respiratory Protection:USE A NIOSH/MSHA (TC-23C) PROPERLY FITTED
VAPOR/PARTICULATE RESPIRATOR FOR USE W/PAINTS & UNTIL VAPORS/SPRAY
MISTS ARE EXHAUSTED. USE A POSITIVE PRESSURE, SUPPLIED AIR
RESPIRATOR (TC-19C) IN CONFINED SPACES OR IN TYPICAL SPRAY
APPLICATIONS.
Ventilation:SUFFICIENT IN VOLUME & PATTERN TO KEEP Protective Gloves:NEOPRENE
Eye Protection:SPLASH GUARDS OR SIDE SHIELDS
Other Protective Equipment:COVERALLS
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & BEFORE EATING
OR SMOKING.
Supplemental Safety and Health
BOILING RANGE: 79-374F. PERCENT VOLATILE BY WEIGHT: 68-90%

Chemical Properties

Boiling Pt:B.P. Text:SEE SUPP
Vapor Density:>AIR
Evaporation Rate & Reference:LESS THAN ETHER
Solubility in Water:MISCIBLE
Percent Volatiles by Volume:81-95%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, FLAME, TEMPS >120F OR OTHER
SOURCES OF IGNITION
Hazardous Decomposition Products:CO, CO2, SMOKE

Disposal

Waste Disposal Methods:DON'T ALLOW MATERIAL TO CONTAMINATE GROUND WATER
SYSTEMS. INCINERATE ABSORBED MATERIAL IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REQUIREMENTS. DON'T INCINERATE IN CLOSED
CONTAINERS. CORROSIVE MATERI AL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.