BBNLF - SILVA-GUARD AEROSOL

  • MSDS: BBNLF
  • Manufacturer: ATCO MANUFACTURING CO
  • Product Name: SILVA-GUARD AEROSOL
  • National Stock Number: 6850-00F003637
Product Identification

Product ID:SILVA-GUARD AEROSOL
MSDS Date:01/01/1987
FSC:6850
NIIN:00F003637
MSDS Number: BBNLF

Responsible Party
ATCO MANUFACTURING CO/MARIETTA, GA 30060

Emergency Phone: (800) 327-1835

Cage: 31648

Contractor
ATCO MANUFACTURING CO/MARIETTA, GA 30060

Cage: 31648

Ingredients

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 45%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15 - 20%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

Hazards

Effects of Overexposure:EXCESSIVE PROLONGED INHALATION MAY RESULT IN
DROWINESS/HEADACHES/NAUSEA/EYE/LUNG IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN AND EYE CONTACT: FLUSH
WITH WATER. INGESTION: SEE PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point:100F (TOC)
Extinguishing Media:FOAM, DRY CHEMICAL OR CO2
Fire Fighting Procedures:SPRAY EXTREMELY FLAMMABLE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SOAK UP ON APPROPRIATE ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:DON'T STORE WHERE TEMP. EXCEEDS 120F.

Exposure Controls

Respiratory Protection:NONE REQUIRED AS LONG AS NOT USED IN A SMALL
CLOSED AREA.
Ventilation:GENERAL VENTILATION IS ADEQUATE
Protective Gloves:NONE
Eye Protection:GOGGLES
Other Protective Equipment:GLOVES FOR PROLONGED CONTACT
Supplemental Safety and Health

Chemical Properties

Vapor Pres:36
Spec Gravity:1.188
Evaporation Rate & Reference:1
Solubility in Water:SLIGHT
Appearance and Odor:ALUMINUM COLORED LIQUID PENETRATING ETHER-LIKE
Percent Volatiles by Volume:93%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:DON'T EXPOSE TO HEAT OR TEMP. ABOVE 120F.
Hazardous Decomposition Products:ABNORMALLY HIGH TEMP. POSSIBLE TRACE
AMOUNTS OF PHOSGENE

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.