Product ID:THERMOPOXY
MSDS Date:01/01/1987
FSC:8040
NIIN:00F003670
MSDS Number: BBNMT

REICHHOLD CHEMICALS, INC

Emergency Phone: (800) 423-3003

Cage: 0ANJ9

REICHHOLD CHEMICALS INC

13582 RESEARCH TRIANGLE PARK, NC 27709 US

Telephone: 919-900-7500 (MAIN OFFICE NO)

Cage: 0ANJ9

PHENOL

CAS: 108-95-2

RTECS: SJ3325000

Fraction By Weight: 5%

OSHA PEL S, 5 PPM

ACGIH TLV: S, 5 PPM; 8990

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

POLYAMINE ADDUCTS

Fraction By Weight: 60%

EPOXY RESIN HARDENER

Fraction By Weight: 60%

Effects of Overexposure:HEADACHE, DIZZINESS, MENTAL CONFUSION, WEAKNESS
AND SWEATING.

First Aid:REMOVE TO WELL VENTILATED AREA. IF DIFFICULTY NOTED IN
BREATHING, GET MEDICAL ATTENTION AT ONCE. IF SKIN CONTACT, WASH
W/SOAP & WATER. IF INGESTED, CALL A PHYSICIAN. DON'T INDUCE
VOMITING. EYES: FLUSH W/WATER FOR 15 MINUTES. CALL A PHYSICIAN.

Flash Point:>200F
Extinguishing Media:DRY CHEMICAL, CO2, FOAM, FOG.
Fire Fighting Procedures:CLOSED CONTAINERS MAY RUPTURE OR EXPODE WHEN
HEATED.
Unusual Fire/Explosion Hazard:FIREFIGHTERS SHOULD WEAR SCBA TO AVOID
INHALATION OF SMOKE OR VAPORS. GASES MAY BE POISONOUS.

Spill Release Procedures:VENTILATE AREA. ABSORB WITH INERT MATERIAL AND
PLACE IN A CLOSED CONTAINER. RESIDUE N BE CLEANED UP BY SCRUBBING
WITH 5% ACETIC ACID AND/OR SOAP & WATER. WE PROTECTIVE EQUIPMENT
DURING CLEANUP.

Handling and Storage Precautions:AVOID ALL SKIN CONTACT. AVOID
PROLONGED OR REPEATED INHALATION OF SPRAY MISTS/HEATED VAPORS. U
ADEQUATE VENTILATION.
Other Precautions:AVOID WARM STORAGE AND IGNITION SOURCES. HANDLE AS A
CORROSIVE LIQUID.

Respiratory Protection:MUST BE WORN TO AVOID BREATHING SPRAY MISTS,
HEATED VAPORS IF >TLV
Ventilation:LOCAL EXHAUST AND GENERAL VENTILATION REQUIRED.
Protective Gloves:PLASTIC/RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:SAFETY SHOWER AND EYE WASH FOUNTAIN.
Supplemental Safety and Health

Boiling Pt:B.P. Text:>212F
Vapor Density:>1
Spec Gravity:1.024
Solubility in Water:APPRECIABLE
Appearance and Odor:TRANSPARENT AMBER LIQUID/MODERATE AMINE ODOR.
Percent Volatiles by Volume:0%

Stability Indicator/Materials to Avoid:YES
ACIDS, EPOXY RESINS, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT, STRONG ACIDS, EPOXY
RESINS.
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN, SMOKE,
GASES MAY BE POISONOUS.
Conditions to Avoid Polymerization:EXOTHERMIC REACTION WITH EPOXY
RESINS.

Waste Disposal Methods:INCINERATE IN AN APPROVED INCINERATE OR DISPOSE
OF IN A CHEMICAL DUMP IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.