Product ID:KRYLON FLUORESCENT SPRAY PAINT, 3107
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003731
MSDS Number: BBNQW

BORDEN, INC/COLUMBUS, OHIO 43215

Emergency Phone: (614) 457-5200

Cage: EO431

KRYLON PRODUCTS

SOLON, OH 44139 US

Telephone: 800-832-2541/216-566-2917

Cage: 87187

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 12.0%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 16.0%

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 12.0%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 18.0%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

N-HEPTANE

CAS: 142-82-5

RTECS: MI7700000

Fraction By Weight: 17.0%

OSHA PEL 500 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9293

Effects of Overexposure:INHALATION: MAY BE HARMFUL IF INHALED. LIQUID
OR CAUSE IRRITATION NOSE, THROAT AND LUNGS.

First Aid:INGESTION: IF SWALLOWED, DON'T INDUCE VOMITING. INHALATION:
REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE OXYGEN. SKIN:
FLUSH W/WATER. EYE: FLUSH W/WATER FOR AT LEAST 15 MINUTES. CALL A
PHYSICI AN.

Extinguishing Media:USE DRY CHEMICAL, FOAM OR CO2
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE. WATER COOL
CONTAINERS.
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMP CAUSE BURSTING.
DON'T PUNCTURE OR INCINERATE CONTAINER. DON'T SPRAY NEAR FLAME

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP WITH
ABSORBENT MATERIAL AND REMOVE TO A CHEMAL DISPOSAL AREA. PREVENT
ENTRY INTO NATURAL BODIES OF WATER.

Handling and Storage Precautions:DON'T STORE AT TEMPERATURES >120F.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
EQUIPMENT IF >TLV.
Ventilation:PROVIDE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS GLOVES AS REQUIRED TO
PREVENT SKIN CONTACT.
Supplemental Safety and Health
ALSO CONTAINS: VM&P NAPHTHA (SE7555000) 300 PPM, 8%.

Vapor Pres:50
Vapor Density:>AIR
Spec Gravity:Evaporation Rate & Reference:FASTER THAN BU AC
Solubility in Water:SLIGHT
Percent Volatiles by Volume:83%

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID RADIATORS/STOVES/DIRECT SUNLIGHT OR
OTHER HEAT SOURCE.
Hazardous Decomposition Products:CO, CO2.

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
REQUIREMENTS. EMPTY CONTAINER: MAY CONTAIN EXPLOSIVE VAPORS. DON'T
CUT, PUNCTURE OR WELD ON OR NEARBY. INCINERATION WILL CAUSE
CONTAINER TO BURST VIOLE NTLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.