Product ID:UNIGUARD BRAKE FLUID
MSDS Date:01/01/1987
FSC:9150
NIIN:00F003802
MSDS Number: BBNVD

Emergency Phone: (312) 562-7290

Cage: EO741

Telephone: 708-562-7290

Cage: EO741

MIXED POLYGLYCOL ETHERS

Fraction By Weight: 73%

INHIBITORS

Fraction By Weight: 1%

POLYALKYLENE GLYCOL

Fraction By Weight: 26%

Effects of Overexposure:HARMFUL IF INHALED OR SWALLOWED. MAY CAUSE
NARCOSIS OR KIDNEY INJURY.

First Aid:IF SWALLOWED: INDUCE VOMITING BY GIVING 2 GLASSES OF WATER
AND STICKING FINGERS DOWN THROAT. IN CASE OF EYE CONTACT:
IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15 MINUTES. IN CASE OF SKIN
CONTACT: FLUSH W ITH WATER.

Flash Point:220F-245F (COC)
Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:SCBA IS RECOMMENDED FOR FIREFIGHTERS.
Unusual Fire/Explosion Hazard:WATER TO COOL CONTAINERS; HOWEVER, AVOID
SPREADING BURNING LIQUID W/WATER USED FOR COOLING PURPOSES.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION/KEEP HOT
METAL SURFACES ISOLATED FROM SPILL. FLUSHPILLED MATERIAL INTO
SUITABLE RETAINING AREAS OR CONTAINERS W/LARGE QTYSF WATER. SMALL
OF SPILLED MATERIAL MAY BE AB SORBED INTO APPROPRIATE ABSOANT.

Handling and Storage Precautions:KEEP PRODUCT AND CONTAINERS COOL, DRY
AND AWAY FROM SOURCES OF IGNITION. USE AND STORE THIS PRUCT
W/ADEQUATE VENTILATION.
Other Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE. PERSONNEL
SHOULD AVOID INHALATION OF VAPORS. SHOULD CONTACT BE MADE, REMOVE
SATURATEDLOTHING AND FLUSH AFFECTED AREAS WITH WATER.

Respiratory Protection:NIOSH APPROVED CARTRIDGE RESPIRATOR.
Ventilation:PROVIDE MECHANICAL VENTILATION TO KEEP BELOW TLV
Protective Gloves:IMPERMEABLE
Eye Protection:GLASSES/GOGGLES/FACESHIEL
Other Protective Equipment:IMPERMEABLE APRONS. EYEWASH/SAFETY SHOWERS.
Supplemental Safety and Health
MSDS DATED: JAN 86.

Boiling Pt:B.P. Text:401F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:0%

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS/ACIDS/BASES/SOME AMINES._
Stability Condition to Avoid:HEAT, SPARKS, SOURCES OF IGNITION, OPEN
FLAME.
Hazardous Decomposition Products:COMBUSTION CAN PRODUCE CO2 AND/OR CO.

Waste Disposal Methods:DISPOSE OF USED PRODUCT AND ABSORBANT IN
COMPLIANCE WITH APPLICABLE LOCAL, COUNTY, STATE AND FEDERAL
REGULATIONS REGARDING HEALTH AND ENVIRONMENT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.