BBNVL - C-CAST CASTING TAPE 201-52/53/54/55
- MSDS: BBNVL
- Manufacturer: CUTTER BIOMEDICAL
- Product Name: C-CAST CASTING TAPE 201-52/53/54/55
- National Stock Number: 8030-00F003808
Product Identification
Product ID:C-CAST CASTING TAPE 201-52/53/54/55
MSDS Date:01/01/1987
FSC:8030
NIIN:00F003808
MSDS Number: BBNVL
Responsible Party
Emergency Phone: (415) 420-4000
Cage: 8S126
Contractor
Cage: 8S126
Ingredients
DIPHENYLMETHANE DIISOCYANATE (MDI) (COMPONENT OF FABRIC
RTECS: NQ8805000
ACGIH TLV: 0.02 PPM
Hazards
Effects of Overexposure:WHEEZING COUGH, RESPIRATORY TRACT IRRITATION,
SHORTNESS OF BREATH.
First Aid
First Aid:INHALATION OF VAPOR: REMOVE TO UNCONTAMINATED ARA, ADMINISTER
OXYGEN. SKIN CONTACT: WASH AFFECTED AREAS THROUGHLY WITH
SOAP/WATER. EYE CONTACT: FLUSH WITH LOW PRESSURE WATER 15 MINUTES,
OBTAIN MEDICAL HELP.
Fire Fighting
Flash Point:350F
Extinguishing Media:DRY CHEMICAL, CO2, CHEMICAL FOAM, WATER SPRAY
Fire Fighting Procedures:WEAR SCBA. WATER COOL POUCHES OF PRODUCT
EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION OF ISOCYANATES CAN
CAUSE A PRESSURE BUILD-UP IN SEALED POUCHES.
Accidental Release
Spill Release Procedures:ACETONE OR ALCOHOL MAY BE USED TO CLEAN
NON-POLYMERZED POLYMER FROM SURFACES.
Handling
Handling and Storage Precautions:DON'T PUNCTURE POUCH. STORE AT OR
BELOW ROOM TEMPERATURE.
Other Precautions:A CURED CAST CONTAINS NO FREE ISOCYANATE OR OTHER
TOXIC MATERIAL. POLYMERIZATION OF THE CASTING TAPE BEGINS AS SOON
AS THE PCH IS OPENED AND THE PRODUCT IS EXPOSED TO AMBIENT
HUMIDITY.
Exposure Controls
Respiratory Protection:AN AIR SUPPLIED RESP; AIR- PURIFYING RESP FOR
SHORT TERM EXPOSURE.
Ventilation:USE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:LATEX OR PVC
Eye Protection:GLASSES
Other Protective Equipment:APPLY PADDING AND/OR STOCKINETTE UNDER ALL
CASTS.
Supplemental Safety and Health
MSDS DATED: 7 NOV 85
Chemical Properties
Vapor Pres:<10
Vapor Density:8.5
Spec Gravity:>1.0
Solubility in Water:INSOLUBLE
Appearance and Odor:FIBERGLASS FABRIC W/BROWN URETHANE PREPOLYMER.
Stability
Stability Indicator/Materials to Avoid:YES
WATER OR ALCOHOL UNLESS POLYMERIZATION DESIRED. _
Stability Condition to Avoid:STORE AT OR BELOW ROOM TEMPERATURE FOR
MAXIMUM SHELF LIFE.
Hazardous Decomposition Products:CO, AMINES, OXIDES OF NITROGEN, TRACES
OF HCN AND MDI.
Disposal
Waste Disposal Methods:LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.