BBNWD - RUST-O-CRYLIC TOPCOATS 5786/5790/5792
- MSDS: BBNWD
- Manufacturer: RUST OLEUM CORP
- Product Name: RUST-O-CRYLIC TOPCOATS 5786/5790/5792
- National Stock Number: 8010-00F003823
Product Identification
Product ID:RUST-O-CRYLIC TOPCOATS 5786/5790/5792
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003823
MSDS Number: BBNWD
Responsible Party
Emergency Phone: (312) 367-7700
Cage: 08882
Contractor
Telephone: 847-367-7700
Cage: 08882
Ingredients
PROPYLENE GLYCOL (VAPOR PRESSURE = 0.2)
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: 5%
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 2%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
Hazards
Effects of Overexposure:MAY CAUSE HEADACHE/NAUSEA. SKIN/EYE: PRIMARY
IRRITANT.
First Aid
First Aid:FUMES: REMOVE FROM EXPOSURE. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. NOTIFY A PHYSICIAN. SKIN: WASH AFFECTED AREA WITH
SOAP/WATER, REMOVE CONTAMINATED CLOTHING.
Fire Fighting
Fire Fighting Procedures:WATER TO COOL CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD-UP
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT DUE TO BUILD-UP OF STEAM.
Accidental Release
Spill Release Procedures:FLUSH OR MOP UP SPILL WITH SOAP AND WATER.
Handling
Handling and Storage Precautions:NON-FLAMMABLE.
Other Precautions:DON'T TAKE INTERNALLY. KEEP FROM FREEZING.
Exposure Controls
Respiratory Protection:USE A BUREAU OF MINES APPROVED MECHANICAL FILTER
RESPIRATOR.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV/LEL
Protective Gloves:RUBBER
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:USE GLOVES TO PREVENT PROLONGED SKIN
CONTACT.
Supplemental Safety and Health
WT/GAL: 8.8-11.6 LBS.
Chemical Properties
Boiling Pt:B.P. Text:212-400F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:68%
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.