BBNWY - EPOXY, M1-036/17925 PART A

  • MSDS: BBNWY
  • Manufacturer: CRAWFORD LABORATORIES
  • Product Name: EPOXY, M1-036/17925 PART A
  • National Stock Number: 8010-00F003842
Product Identification

Product ID:EPOXY, M1-036/17925 PART A
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003842
MSDS Number: BBNWY

Responsible Party
CRAWFORD LABORATORIES/CHICAGO, IL 60609

Emergency Phone: (312) 433-1307

Cage: DO165

Contractor
CRAWFORD LABORATORIES, INC
CHICAGO, IL 60609 US

Telephone: 312-376-7132

Cage: 5V430

Ingredients

KETONES (VAPOR PRESSURE = 71.2)

Fraction By Weight: <5%

ACGIH TLV: 200 PPM


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 15 - 25%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-ETHOXYETHANOL (EGEE) (SARA III)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: <5%

OSHA PEL S,200 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:MAY PRODUCE VARIOUS EFFECTS, INCLUDING:
HEADACHE, DIZZINESS, NAUSEA & LOSS OF CONSCIOUSNESS.

First Aid

First Aid:EYE: FLUSH W/WATER FOR 15 MINS. INHALATION: REMOVE VICTIM TO
FRESH AIR/PROVIDE OXYGEN IF BREATHING IS DIFFICULT. INGESTION:
DON'T INDUCE VOMITING. SKIN: FLUSH W/WATER WHILE REMOVING
CONTAMINATED CLOTH ING/SHOES. WASHING W/SOAP & WATER. GET MED ATT

Fire Fighting

Flash Point:55F SETA
Lower Limits:1.8%
Extinguishing Media:FOAM, CO2, OR DRY CHEMICAL
Fire Fighting Procedures:WATER TO COOL CONTAINERS/KEEP FLAMMABLE
STRUCTURES WET.
Unusual Fire/Explosion Hazard:WATER PRESSURE MAY SPREAD A FLAMMABLE
LIQUID FIRE. SEALED CONTAINERS MAY EXPLODE IF OVERHEATED.

Accidental Release

Spill Release Procedures:WARNING-FLAMMABLE. ELIMINATE ALL IGNITION
SOURCES. HANDLING EQUIPMENT MUST BE GROUND TO PREVENT SPARKING.
SOAP UP WITH AN ABSORBANT AND PLACE IN NON-LEAKINGONTAINERS. SEAL
TIGHTLY FOR PROPER DISPOSAL.

Handling

Handling and Storage Precautions:TREAT AS ANY HAZARDOUS-FLAMMABLE
MATERIAL.

Exposure Controls

Respiratory Protection:A NIOSH/MSHA APPROVED RESP EQUIPPED W/ORGANIC
VAPOR CARTRIDGE WORN.
Ventilation:PROVIDE ADEQUATE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:HAVE EYE BATH AVAILABLE.
Supplemental Safety and Health
MSDS DATED: 12 DEC 85. WG/GAL: 12.77.

Chemical Properties

Boiling Pt:B.P. Text:124-273F
Vapor Density:>AIR
Evaporation Rate & Reference:(N-BU AC=1) 1.63
Appearance and Odor:WHITE LIQUID.
Percent Volatiles by Volume:43.0

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND STRONG ALKALIES.
Stability Condition to Avoid:AVOID HEAT/SPARKS/OPEN FLAMES
_
Hazardous Decomposition Products:CO/UNIDENTIFIED ORGANIC COMP MAY BE
FORMED DURING COMBUSTION

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH CURRENT
LOCAL, STATE AND FEDERAL REGULATIONS. CONTACT AN APPROVED DISPOSAL
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.