BBNZG - MAGNOLIA 1058, UNPIGMENTED

  • MSDS: BBNZG
  • Manufacturer: MAGNOLIA PLASTIC
  • Product Name: MAGNOLIA 1058, UNPIGMENTED
  • National Stock Number: 8040-00F003884
Product Identification

Product ID:MAGNOLIA 1058, UNPIGMENTED
MSDS Date:01/01/1987
FSC:8040
NIIN:00F003884
MSDS Number: BBNZG

Responsible Party
MAGNOLIA PLASTIC/CHAMBLEE, GA 30341

Emergency Phone: (404) 451-2777

Cage: 22121

Contractor
MAGNOLIA PLASTICS INC
CHAMBLEE, GA 30341-2234 US

Telephone: (770) 451-2777/(800) 457-4280

Cage: 22121

Ingredients

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 4%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

Hazards

Effects of Overexposure:MODERATELY IRRITATING TO SKIN/EYES. MAY BE A
STRONG SKIN SENSITIZER.

First Aid

First Aid:IN CASE OF SKIN CONTACT: WASH WITH SOAP/WATER. IN EYES: FLUSH
WITH WATER FOR 15 MINUTES. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:>200F PMCC
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:IN CONFINED AREAS NIOSH APPROVED SCBA. AVOID
BREATHING SMOKE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:WIPE WITH A RAG OR COLLECT ON ABSORBENT
MATERIAL. PLACE IN SALVAGE VESSELS.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN TIGHTLY
CLOSED CONTAINER.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST AND MECHANICAL
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS TO PREVENT
PERSONAL CONTACT.
Supplemental Safety and Health
MSDS DATED: 9 JAN 1986.

Chemical Properties

Boiling Pt:B.P. Text:>200F
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:1.5
Evaporation Rate & Reference:(BU AC=1) <1
Solubility in Water:SLIGHT
Appearance and Odor:NEUTRAL VISCOUS LIQUID; ETHER ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS AND BASES
Hazardous Decomposition Products:OXIDES OF CARBON
Conditions to Avoid Polymerization:CURING PROCESS IS EXOTHERMIC.

Disposal

Waste Disposal Methods:CURE, THEN BURY. REMOVE SALVAGE VESSELS TO A
WASTE DISPOSAL SITE OPERATING IN COMPLIANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.