Product ID:3M BRAND HIGH STRENGTH ADHESIVE 90
MSDS Date:11/08/1985
FSC:8040
NIIN:01-194-3457
MSDS Number: BBPDP

MINNESOTA MINING AND MFG CO

3M CTR 224-2S-25
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1341

Info Phone: 612-733-1341/612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 47%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CYCLOHEXANE (SARA III)

CAS: 110-82-7

RTECS: GU6300000

Fraction By Weight: 2.0%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM, 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

OSHA PEL 1800 MG/CUM

ACGIH TLV: 1000 PPM

TERPENE RESIN

SYNTHETIC RESIN

SYNTHETIC RUBBER

ANTIOXIDANT

UV ABSORBER

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: DEFATTING &
IRRITATION. INHALATION: RESPIRATORY SYSTEM IRRITATION, DIZINESS,
HEADACHE, NAUSEA, LUNG, LIVER, & HEART DAMAGE, NUMBNESS, HEART
DAMAGE, UNCONSCIOUSNESS & DEATH.
Explanation of Carcinogenicity:METHYLENE CHLORIDE IS CONSIDERED TO BE
AN A2 CARCINOGEN BY ACGIH.
Effects of Overexposure:INHALATION: RESPIRATORY SYSTEM IRRITATION,
DIZZINESS, HEADACHE, NAUSEA, LUNG, LIVER & HEART DAMAGE, NUMBNESS,
HEART DAMAGE, UNCONSCIOUSNESS & DEATH. SKIN: DEFATTING &
IRRITATION. EYES: IRRITATION.

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:
WASH W/SOAP & WATER. INHALATION: PROVIDE FRESH AIR. INGESTION: CALL
PHYSICIAN.

Flash Point Method:CC
Flash Point:-50F
Fire Fighting Procedures:FIREFIGHTERS SHOULD BE EQUIPPED W/SCBA WHEN
FIGHTING FIRES.
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY EXPLODE WHEN HEATED.

Spill Release Procedures:IF CONTAINERS HAVE RUPTURED, COVER W/ABSORBENT
MATERIAL, PLACE IN METAL CONTAINER AND SEAL.

Handling and Storage Precautions:AVOID PROLONGED BREATHING OF
VAPORS/OVERSPRAY (AIRBORNE PARTICLES) DURING APPLICATION. AVOID
CTACT WITH EYES AND SKIN.
Other Precautions:AVOID VAPOR CONTACT WITH OPEN FLAMES WELDING ARCS OR
OTHER HIGH TEMPERATURE SOURCES WHICH MIGHT CAUSE VAPOR
DECOMPOSITION TORODUCE HARMFUL GASES.

Respiratory Protection:USE ONLY IN AREAS ADEQUATELY VENT/REMOVE
VAPORS/PREV. VAPOR BUILDUP.
Ventilation:LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV/LEL
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

HCC:V3
Vapor Pres:COMP. GAS
Vapor Density:2.93
Evaporation Rate & Reference:(ETHER = 1): 1.8
Solubility in Water:NIL
Appearance and Odor:CLEAR-WHITE LIQUID.
Percent Volatiles by Volume:89%

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, FLAME
Hazardous Decomposition Products:CO, CO2, HYDROGEN CLORIDE, POSIBLE
TRACE AMOUNTS OF CHLORINE & PHOSGENE

Waste Disposal Methods:EMPTY CONTAINER MAY BE DISPOSED IN A SANITARY
LANDFILL IN ACCORDANCE W/LOCAL REGULATIONS. DON'T PUNCTURE CAN OR
INCINERATE IN HOUSEHOLD INCINERATORY. EMPTY CANS, RUPTURED
CANS/ABSORBENT SHOULD BE INCI NERATED PROPERLY IN A PERMITTED
HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.