BBPDQ - FERROUS SULFATE HEPTAHYDRATE

  • MSDS: BBPDQ
  • Manufacturer: QC CORP
  • Product Name: FERROUS SULFATE HEPTAHYDRATE
  • National Stock Number: 6810-00F003953
Product Identification

Product ID:FERROUS SULFATE HEPTAHYDRATE
MSDS Date:01/01/1987
FSC:6810
NIIN:00F003953
MSDS Number: BBPDQ

Responsible Party
QC CORP/GLEN BURNIE, MARYLAND 21061

Emergency Phone: (301) 787-0060

Cage: EO758

Contractor
QC CORP/GLEN BURNIE, MARYLAND 21061
BALTIMORE, MD 21208 US

Telephone: 410-486-0010

Cage: EO758

Ingredients

FERROUS SULFATE (SARA III)

CAS: 7782-63-0

RTECS: NO8510000

Fraction By Weight: 100%

OSHA PEL 1 MG FE/M3

ACGIH TLV: 1 MG FE/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:EYE CONTACT IS IRRITATING AND CAN BE DAMAGING.
SKIN CONTACT: REPEATED OR PROLONGED, IS IRRITATING.

First Aid

First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES. SKIN: REMOVE CONTAMINATED
CLOTHING. FLUSH W/WATER. INHALATION: REMOVE TO FRESH AIR. KEEP WARM
& REST. INGESTION: GIVE MILK OR WATER, IF CONSCIOUS AND INDUCE
VOMITING . CONTACT PHYSICIAN.

Fire Fighting

Flash Point:NOT COMBUSTIBLE
Extinguishing Media:USE WHICH IS APPROPRIATE FOR THE SURROUNDING FIRE
CONDITIONS
Fire Fighting Procedures:PROTECTIVE CLOTHING/SELF-CONTAINED BREATHING
Unusual Fire/Explosion Hazard:IT IS DECOMPOSED AT HIGH TEMPERATURES TO
PRODUCE TOXIC AND CORROSIVE MATERIALS.

Accidental Release

Spill Release Procedures:AVOID DUSTY CONDITIONS PICK UP SPILLED SOLID
FOR RECOVERY OR DISPOSAL. THOSE INVOLVEIN CLEAN UP NEED PROTECTION
FROM INHALATION/FROM SKIN CONTACT. TRACE RESUES CAN BE FLUSHED
W/WATER, BUT DON'T SEND T HIS SOLUBLE IRON COMPOUND TOEWERS.

Handling

Handling and Storage Precautions:STORE IN WELL-CLOSED CONTAINERS IN A
COOL, DRY AREA, AWAY FROM ALKALINE MATERIALS/OXIDIZING AGTS.
OXIDIZES IN MOIST AIR TO FERRIC SULFATE.
Other Precautions:AVOID BREATHING DUST OR SOLUTION MISTS. KEEP OFF SKIN
OR CLOTHING; THOROUGHLY RINSE AND LAUNDER CONTAMINATED CLOTHING
BEFOREEUSE. KEEP OUT OF EYES. DON'T INGEST.

Exposure Controls

Respiratory Protection:IN CASES WHERE THE TLV IS EXCEEDED, APPROVED
DUST RESP MUST BE USED
Ventilation:PROVIDE EXHAUST VENTILATION TO KEEP BELOW LEL/TLV
Protective Gloves:NEOPRENE/RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:AN EYEWASH STATION/SAFETY SHOWER/OTHER
PROTECTIVE CLOTHING.
Supplemental Safety and Health
MELTING POINT: 64C. PH (10% AQUEOUS SOLU.): 3.7. MSDS DATED: NOV 1985.

Chemical Properties

Spec Gravity:1.898
Solubility in Water:SOLUBILITY
Appearance and Odor:BLUE-GREEN/FREE-FLOWING/FINE CRYSTALS. NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ALKALIES, SOLUBLE CARBONATES AND OXIDIZING AGENTS
Stability Condition to Avoid:IT IS ACIDIC AND A REDUCING AGENT.
Hazardous Decomposition Products:LOSS WATER, DECOMPOSES TO SOX

Disposal

Waste Disposal Methods:TREAT WATER SOLUTION OF SCRAP MATERIAL W/SODA
ASH OR DILUTE SODIUM HYDROXIDE TO PRECIPITATE IRON. SEPARATE THE
PRECIPITATE/DISPOSE OF IN AN APPROVED LANDFILL. FOLLOW FEDERAL,
STATE AND LOCAL REGULATIO NS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.