BBPDY - CLOCKWISE VANDALISM MARK REMOVER

  • MSDS: BBPDY
  • Manufacturer: HUNTINGTON LABORATORIES
  • Product Name: CLOCKWISE VANDALISM MARK REMOVER
  • National Stock Number: 7930-00F003961
Product Identification

Product ID:CLOCKWISE VANDALISM MARK REMOVER
MSDS Date:01/01/1987
FSC:7930
NIIN:00F003961
MSDS Number: BBPDY

Responsible Party
HUNTINGTON LABORATORIES/HUNTINGTON, IN 46750

Emergency Phone: (219) 356-8100

Cage: 39800

Contractor
HUNTINGTON LABORATORIES/HUNTINGTON, IN 46750

Cage: 39800

Ingredients

DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 7%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 35%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 8%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:INHALATION: DROWSINESS/HEADACHE/LUNG
IRRITATION/NAUSEA. EYES/SKIN MAY CAUSE IRRITATION.

First Aid

First Aid:INHALATION: MOVE TO FRESH AIR. EYES: FLUSH WITH FLOWING WATER
FOR 15 MINUTES. IF IRRITATION PERSISTS CALL PHYSICIAN. SKIN: RINSE
WITH WATER. INGESTION: DON'T INDUCE VOMITING. CALL A PHYSICIAN
IMMEDIAT ELY.

Fire Fighting

Flash Point:64F TOC
Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SOAK UP WITH AN APPROPRIATE ABSORBENT MATERIAL
OR FLUSH WITH WATER.

Handling

Handling and Storage Precautions:DON'T STORE OR USE NEAR HEAT, SPARKS
OR OPEN FLAMES. DON'T STORE WHERE TEMPERATURES EXCEED 120
Other Precautions:DON'T PUNCTURE OR INCINERATE. MAY SOFTEN SOME
PLASTICS, PAINT AND ASPHALT IF USED EXCESSIVELY. KEEP AWAY FROM
CHILDREN.

Exposure Controls

Ventilation:NORMAL
Protective Gloves:NONE REQUIRED
Eye Protection:GOGGLES
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health
MSDS DATED: 12 NOV 1985. PH: 7.2

Chemical Properties

Vapor Pres:45
Spec Gravity:0.93
Evaporation Rate & Reference:(WATER = 1): 1
Solubility in Water:100%
Appearance and Odor:CREAMY WHITE GEL, MILD ODOR.
Percent Volatiles by Volume:95%

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CARBON DERIVATIVES

Disposal

Waste Disposal Methods:SANITARY LANDFILL DISPOSE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.