BBPFK - CAL SIL - IRON CAL SIL

  • MSDS: BBPFK
  • Manufacturer: GLOBE METALLURGICAL
  • Product Name: CAL SIL - IRON CAL SIL
  • National Stock Number: 6810-00F003970
Product Identification

Product ID:CAL SIL - IRON CAL SIL
MSDS Date:01/01/1987
FSC:6810
NIIN:00F003970
MSDS Number: BBPFK

Responsible Party
GLOBE METALLURGICAL/BEVERLY, OHIO 45715

Emergency Phone: (614) 984-2361

Cage: 0LNE8

Contractor
GLOBE METALLURGICAL/BEVERLY, OHIO 45715

Cage: 0LNE8

Ingredients

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 85%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


IRON (4-55%)

RTECS: NO6920000

Fraction By Weight: 55%

ACGIH TLV: 10MG/CUM


CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <.5%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


CALCIUM (10-40%)

CAS: 7440-70-2

RTECS: EV8040000

Fraction By Weight: 40%

ACGIH TLV: 5MG/CUM

Hazards

Effects of Overexposure:IRRITATING COUGH, RESPIRATORY SYSTEM IRRITATION

First Aid

First Aid:EYE: FLUSH WITH WATER. INHALATION: MOVE TO WELL VENTILATED
AREA.

Fire Fighting

Flash Point:540F
Extinguishing Media:USE DRY CHEMICAL, SAND OR CO2 TO SMOTHER FIRE.
Fire Fighting Procedures:LUMP CAL SIL/FERROCALCIUM SILICON ISN'T
FLAMMABLE.
Unusual Fire/Explosion Hazard:FIRE MAY BE ISOLATED/ALLOWED TO BURN
ITSELF OUT. DON'T DISTURB BURNING METAL WHILE EXT. THE FIRE.

Accidental Release

Spill Release Procedures:FINE MATERIAL SHOULD BE SWEPT UP. AVOID USING
COMPRESSED AIR TO REMOVE FINE MATERIALNO PROBLEM ASSOCIATED WITH
CLEANUP OF LUMP MATERIAL. GLOVES SHOULD BE WO TO AVOID CUTS AND
ABRASIONS. KEEP WET MATER IAL SEPARATED FROM DRY MATERL.

Handling

Handling and Storage Precautions:KEEP MATERIAL DRY WHEN STORING FOR
EXTENDED PERIODS OF TIME. NO SPECIAL LABELS ARE REQ. GRINDI WET
MATERIAL MAY BE HAZ DUE TO HYDROGEN EVOLUTION

Exposure Controls

Respiratory Protection:IN DUSTY AREAS USE NIOSH APPROVED SCHEDULE 21C
RESP PROTECTION.
Ventilation:LOCAL EXHAUST NEEDED IF CRUSHING/GRINDING THE MATERIAL.
Supplemental Safety and Health
MSDS DATED: 24 NOV 1985.

Chemical Properties

Spec Gravity:2-4
Solubility in Water:INSOLUBLE
Appearance and Odor:METALLIC GREY COLOR, NO ODOR.
Percent Volatiles by Volume:.001

Stability

Stability Indicator/Materials to Avoid:YES
REACTS RAPIDLY IN HYDROFLUORIC/NITRIC ACIDS/MOLTEN ALKALI.
Stability Condition to Avoid:AVOID CONTACT W/MOISTURE. AVOID CONTACT
W/HALOGEN ACIDS.
Hazardous Decomposition Products:ARSIN/PHOSPHINE/HYDROGEN MAY EVOLVE IF
MOISTURE IS PRESENT

Disposal

Waste Disposal Methods:AVOID REPLACING WET MATERIAL IN SEALED
CONTAINERS. DRY LUMP MATERIAL IS INERT AND NON-TOXIC.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.