BBPFT - "A" ABRASIVE WHEELS
- MSDS: BBPFT
- Manufacturer: BAY STATE ABRASIVES
- Product Name: "A" ABRASIVE WHEELS
- National Stock Number: 6850-00F003978
Product Identification
Product ID:"A" ABRASIVE WHEELS
MSDS Date:01/01/1987
FSC:6850
NIIN:00F003978
MSDS Number: BBPFT
Responsible Party
Emergency Phone: (617) 366-4431
Cage: 16163
Contractor
Telephone: 508-366-4431
Cage: 16163
Ingredients
ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
CAS: 1344-28-1
RTECS: BD1200000
Fraction By Weight: +50%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
RUBBER
Fraction By Weight: +4%
ACGIH TLV: 10 MG/CUM
ALUMINUM SODIUM FLUORIDE (SODIUM FLUOALUMINATE OR CRYOLITE)
CAS: 15096-52-3
RTECS: WA9625000
Fraction By Weight: +1%
OSHA PEL 2.5 MG/M3 (F)
ACGIH TLV: 2.5 MG/M3 (F); 8990
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: +1%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
STYRENE/BUTADIENE
RTECS: WL4080000
Fraction By Weight: +1%
Hazards
Effects of Overexposure:GRINDING WHEELS BREAK DOWN DURING USE/THE
RESULTING DUST IS CLASSIFIED BY OSHA AS INERT/DUST.
First Aid
First Aid:IF INHALATION OVEREXPOSURE OCCURS, REMOVE TO FRESH AIR AND
CONTACT PHYSICIAN IF NECESSARY.
Fire Fighting
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:VENTILATE AREAS AND COLLECT MATERIAL IN MOST
CONVENIENT AND SAFE MANNER FOR RECLAIMAON OR DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN A DRY AREA. TAKE MEASURES TO
INSURE AGAINST MECHANICAL DAMAGE.
Other Precautions:STORE IN ACCORDANCE WITH ANSI B7.1. RESPIRATORY
PROTECTION MAY BE REQUIRED IN AN EXTREMELY DUSTY ENVIRONMENT. USE
ACCORDING INSTRUCTIONS PACKED WITH THE WHEELS.
Exposure Controls
Respiratory Protection:MSHA OR NIOSH APPROVED DUST RESPIRATORS MAY BE
REQUIRED
Ventilation:UTILIZE LOCAL EXHAUST VENTILATION TO KEEP DUST BELOW TLV
Protective Gloves:REQUIRED
Eye Protection:GOGGLES
Other Protective Equipment:IF APPLICABLE
Supplemental Safety and Health
MSDS DATED: 14 NOV 1985. ALSO CONTAINS: SULFUR (WS4250000) +1%/PYRITE
(FES) +1%/LIMESTONE (EV9580000) +1%/DPR RUBBER (NT40000)
+1%/NEOPRENE (EI9660000) +1%.
Chemical Properties
Solubility in Water:NOT SOLUBLE
Appearance and Odor:RED/BROWN/GRY SOLID, HEAT CAUSES RUBBER ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF IN A SECURED SANITARY LANDFILL AND IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.