Product ID:FIBERGLASS RESIN, PRODUCT: 58015/58020
MSDS Date:01/01/1987
FSC:8030
NIIN:00F003980
MSDS Number: BBPFW

U.S. CHEMICAL & PLASTICS/CANTON, OHIO 44706

Emergency Phone: (216) 455-4311

Cage: EO768

U.S. CHEMICAL & PLASTICS/CANTON, OHIO 44706

CANTON, OH 44706 US

Telephone: 216-455-4311

Cage: EO768

POLYESTER UNSATURATED

Fraction By Weight: 63%

STYRENE, MONOMER (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 37%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:HARMFUL OR FATAL IF SWALLOWED! IRRITANT WHEN IN
CONTACT WITH EYES/OPEN OR ABRADED SKIN!

First Aid:SWALLOWED: REMOVE VICTIM FROM EXPOSURE TO WELL-VENTILATED
AREA. MAKE COMFORTABLY WARM BUT NOT HOT. DON'T INDUCE VOMITING. IF
CONSCIOUS GIVE VICTIM WATER TO DRINK. CALL A PHYSICIAN. EYE: FLUSH
W/WATER. SKIN: WASH WITH SOAP/WATER. CALL A PHYSICIAN.

Flash Point:87F TCC
Extinguishing Media:CO2, DRY CHEMICALS, FOAM
Fire Fighting Procedures:NONE-FIGHT LIKE A FUEL OIL FIRE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:PICK UP LARGE SPILLS WITH INERT ABSORBENTS
LIKE VERMICULITE OR SAND, AND PLACE IN A OPER CONTAINER FOR
DISPOSAL. WASH AND CLEAN UP SMALL SPILLS WITH WATER A DETERGENTS.

Handling and Storage Precautions:KEEP AWAY FROM EXTREME HEAT/OPEN
FLAME/OTHER SOURCES OF IGNITION. DON'T STORE ABOVE 100F. USE
ADEQUATE VENTILATION.
Other Precautions:DANGER: HARMFUL OR FATAL IF SWALLOWED! CONTAINS
PETROLEUM DISTILLATES! COMBUSTIBLE! AVOID CONTACT WITH EYES! AVOID
BREATHINGF VAPORS.

Respiratory Protection:VENIILATE WITH AIR FLOW TO KEEP VAPOR
CONCENTRATION BELOW TLV
Ventilation:LOCAL/MECHANICAL. VENTILATION: USE IN WELL VENT. AREA.
Protective Gloves:NEOPRENE
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
MSDS DATED: 15 NOV 1985.

Vapor Density:>1
Spec Gravity:1.1
Evaporation Rate & Reference:(ETHYL ETHER=1) <1
Solubility in Water:NONE
Appearance and Odor:AMBER TO BROWN VISCOUS LIQUID.
Percent Volatiles by Volume:37%

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/STRONG OXIDIZING AGENTS (LIKE PEROXIDES)
Stability Condition to Avoid:OPEN FLAME/SPARKS/EXCESSIVE HEAT/STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:CO AND CO2
Conditions to Avoid Polymerization:STRONG OXIDIZING
AGENTS/SUNLIGHT/CONTAMINATION

Waste Disposal Methods:DISPOSAL METHOD MUST COMPLY WITH LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.