BBPFX - ANSUL 6% FLUOROPROTEIN FOAM

  • MSDS: BBPFX
  • Manufacturer: ANSUL FIRE PROTECTION
  • Product Name: ANSUL 6% FLUOROPROTEIN FOAM
  • National Stock Number: 4210-00F003981
Product Identification

Product ID:ANSUL 6% FLUOROPROTEIN FOAM
MSDS Date:01/01/1987
FSC:4210
NIIN:00F003981
MSDS Number: BBPFX

Responsible Party
ANSUL FIRE PROTECTION/MARINETTE, WI 54143

Emergency Phone: (715) 735-7411

Cage: 03670

Contractor
ANSUL INC
MARINETTE, WI 54143-2542 US

Telephone: 715-735-7411

Cage: 03670

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 12%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


HEXYLENE GLYCOL

CAS: 107-41-5

RTECS: SA0810000

Fraction By Weight: 17%

OSHA PEL C 25 PPM

ACGIH TLV: C 25 PPM; 9192


DICHLOROPHENE

CAS: 97-23-4

RTECS: SM0175000

Fraction By Weight: .02%


PROTEIN HYDROLYSATE GLYCOL SOLVENT


FLUOROSURFACTANT

Hazards

Effects of Overexposure:IRRITATION OF THE EYES, SKIN & RESPIRATORY
TRACT. UPON INGESTION: NAUSEA, VOMITING AND NARCOSIS.

First Aid

First Aid:EYE: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
W/WATER. INHALATION: REMOVE VICTIM TO FRESH AIR. INGESTION: IF
PATIENT IS CONSCIOUS, GIVE NO MORE THAN 2 GLASSES OF WATER AND
INDUCE VOMITING. GE T MEDICAL ATTENTION.

Fire Fighting

Flash Point:NONE
Fire Fighting Procedures:THIS IS AN EXTINGUISHING AGENT.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:RINSE FLOOR THOROUGHLY WITH WATER AS MATERIAL
IS SLIPPERY. PREVENT MATERIAL FROM REAING SEWERS OR WATERWAYS TO
AVOID NUISANCE FOAMING.

Handling

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINER. DON'T MIX
AGENTS. AVOID SKIN/EYE CONTACT. AVOID INGESTION. AVOID EATHING
VAPORS IF GENERATED.

Exposure Controls

Respiratory Protection:APPROVED ORGANIC VAPOR RESP IN ABSENCE OF
ENVIRONMENTAL CONTROLS.
Ventilation:MECHANICAL: RECOMMENDED
Protective Gloves:PLASTIC
Eye Protection:GOGGLES
Other Protective Equipment:EYE WASH/SAFETY SHOWERS ARE GOOD SAFETY
PRACTICE.
Supplemental Safety and Health
MSDS DATED: 15 NOV 1985. ALSO CONTAINS: INORGANIC SALTS & WATER.

Chemical Properties

Boiling Pt:B.P. Text:102F
Vapor Density:1
Spec Gravity:1.12
Evaporation Rate & Reference:(BU AC = 1) 0.37
Solubility in Water:100%
Appearance and Odor:RED/BROWN OPAQUE LIQUID-MILDLY PUNGENT ODOR.
Percent Volatiles by Volume:70

Stability

Stability Indicator/Materials to Avoid:YES
METALS/ELEC ENERGIZED EQUIP/ANY MATERIALS REACTIVE W/WATER.

Disposal

Waste Disposal Methods:DISPOSE OF IN COMPLIANCE WITH ALL LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.