BBPGB - 80C28-04 POLYURETHANE ADHESIVE CEMENT

  • MSDS: BBPGB
  • Manufacturer: GOODYEAR
  • Product Name: 80C28-04 POLYURETHANE ADHESIVE CEMENT
  • National Stock Number: 8040-00-518-3455
Product Identification

Product ID:80C28-04 POLYURETHANE ADHESIVE CEMENT
MSDS Date:01/01/1987
FSC:8040
NIIN:00-518-3455
MSDS Number: BBPGB

Responsible Party
GOODYEAR/AKRON, OH 44315

Emergency Phone: (216) 796-2121

Cage: LO506

Contractor
GOODYEAR/AKRON, OH 44315
ROCKMART, GA 30153 US

Telephone: 404-684-7855/FAX -7438

Cage: LO506

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 85%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


4,4'-METHYLENE DIANILINE (SARA III)

CAS: 101-77-9

RTECS: BY5425000

Fraction By Weight: 20%

ACGIH TLV: S; 0.1 PPM; A2; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


4,4'-METHYLENE DIANILINE (SARA III)

CAS: 101-77-9

RTECS: BY5425000

ACGIH TLV: S; 0.1 PPM; A2; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:INHALATION, SKIN ABSORPTION. EYE IRRITATION.
FEVER/CHILLS/ANOREXIA/NAUSEA/RESPIRATORY IRRITATION.

First Aid

First Aid:INHALATION: IF AFFECTED, REMOVE TO FRESH. SKIN: WASH EXPOSED
AREA W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING. LAUNDER
CONTAMINATED CLOTHING BEFORE RE-USE. EYE: FLUSH W/WATER. INGESTION:
GIVE 2 GLASS ES OF WATER. INDUCE VOMITING. CALL A PHYSICIAN.

Fire Fighting

Flash Point:21F CC
Lower Limits:12%
Upper Limits:20%
Extinguishing Media:AALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE A SCBA W/A FULL FACEPIECE UNDER POSITIVE
PRESSURE.
Unusual Fire/Explosion Hazard:MAY TRAVEL ALONG THE GROUND/MAY BE MOVED
BY VENT/IGNITED AT LOCATIONS DISTANT FROM THE MATERIAL.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. PROVIDE ADEQ.
VENT. USE PERSONAL PROTECTIVE GEAR AS NECSARY. CONTAIN/LOCALIZE
SPILL W/ABSORBENTS. PREV. DISCHARGE TO STORM/SANIRY SEWER. STORE
SPENT SORBENT IN CONTAINER A PPROVED FOR STORAGE OF FLAMMATERIAL.

Handling

Handling and Storage Precautions:STORAGE AREA SHOULD BE WELL
VENTILATED. STORE AWAY FROM SOURCES OF HEAT OR OPEN FLAMES. KEEP
CTAINER CLOSED WHEN NOT IN USE.

Exposure Controls

Respiratory Protection:IF >TLV'S, USE NIOSH/MSHA APPROVED RESPIRATOR TO
PREV. OVEREXPOSURE.
Ventilation:PROVIDE ADEQ, EXPLOSION-PROOF VENT. TO KEEP BELOW TLV'S
Protective Gloves:BUTYL
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS PROTECTIVE CLOTHING TO
PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS DATED: NOV 1985. 2 PART POLYURETHANE ADHESIVE CEMENT FOR FUEL
SYSTEM REPAIR.

Chemical Properties

Vapor Pres:70.
Vapor Density:>1
Spec Gravity:0.864
Solubility in Water:SOLUBLE
Appearance and Odor:AMBER LIQUID, METHYL ETHYL KETONE ODOR.
Percent Volatiles by Volume:85.7

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAME.
Hazardous Decomposition Products:CO, CO2, NOX

Disposal

Waste Disposal Methods:INCINERATE AT FACILITY APPROVED FOR HAZARDOUS
WASTE DISPOSAL BY FEDERAL, STATE & LOCAL REGULATIONS. LANDFILL
PRODUCT OR CONTAMINATED SORBENT OR SOIL ONLY WHEN SOLIDIFIED W/NO
FREE LIQUIDS REMAINING/TH EN IN HAZARDOUS WASTE DISPOSAL LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.