BBPGW - NIBCO CPVC SOLVENT CEMENT
- MSDS: BBPGW
- Manufacturer: NIBCO
- Product Name: NIBCO CPVC SOLVENT CEMENT
- National Stock Number: 8040-00F004001
Product Identification
Product ID:NIBCO CPVC SOLVENT CEMENT
MSDS Date:01/01/1987
FSC:8040
NIIN:00F004001
MSDS Number: BBPGW
Responsible Party
Emergency Phone: (213) 321-6515
Cage: EO775
Contractor
Telephone: 310-898-3300
Cage: EO775
Ingredients
DYE & INERT FILLER (SEE SUPPLEMENTAL FOR INGREDIENTS)
CPVC RESIN
TETRAHYDROFURAN (SARA III)
CAS: 109-99-9
RTECS: LU5950000
OSHA PEL 200 PPM/250 STEL
ACGIH TLV: 200 PPM/250STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CYCLOHEXANONE (SARA III)
CAS: 108-94-1
RTECS: GW1050000
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:SEVERE OVEREXPOSURE MAY RESULT IN NAUSEA,
DIZZINESS, HEADACHE, CAN CAUSE NARCOSIS.
First Aid
First Aid:VAPORS: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING &
WASH SKIN WITH WATER. EYES: FLUSH WITH WATER FOR 15 MINUTES. GET
MEDICAL ATTENTION. IF SWALLOWED: DON'T INDUCE VOMITING. CALL
PHYSICIAN IMME DIATELY.
Fire Fighting
Flash Point:6F TOC
Lower Limits:1.8%
Upper Limits:11.8
Extinguishing Media:DRY CHEMICAL, CO2, ANSUL "PURPLE-K" AER-O-FOAM
Fire Fighting Procedures:CLOSE QUARTERS REQUIRED SCBA. POSITIVE PRESS.
AIRLINE MASKS.
Unusual Fire/Explosion Hazard:FIRE HAZARD BECAUSE OF LOW FLASH POINTS,
HIGH VOLATILITY AND HEAVY VAPORS.
Accidental Release
Spill Release Procedures:AVOID HOT SURFACES. ABSORB WITH
RAGS/SAND/SAWDUST/FLUSH WITH WATER IMMEDIATELY. PREVT WASHING FROM
ENTERING WATERWAYS. AVOID EXCESSIVE BREATHING OF VAPORS. CLEAN UP
SOLVENT IS NEEDED, USE HIGH FLASH HYDROCARBONS.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAME. AVOID PROLONGED BREATHING OF VAPOR. AVOID SKIN CONCT-STORE
BETWEEN 40 & 110F.
Exposure Controls
Respiratory Protection:USE RESPIRATOR FOR ORGANIC VAPORS FOR CONFINED
AREAS
Ventilation:LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV
Protective Gloves:RUBBER/PVA
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:IMPERVIOUS APRON.
Supplemental Safety and Health
MSDS DATED: 18 NOV 1985. ALSO CONTAINS: MINIMUM 80%, 200 PPM.
Chemical Properties
Boiling Pt:B.P. Text:151F
Vapor Pres:190
Vapor Density:2.49
Evaporation Rate & Reference:(BU AC =1) 8.0
Appearance and Odor:GRAY COLOR, MEDIUM SYRUPY LIQUID, ETHEREAL ODOR
Percent Volatiles by Volume:90%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:KEEP AWAY FROM SPARKS AND OPEN FLAME.
Disposal
Waste Disposal Methods:COMPLY WITH FEDERAL, STATE AND LOCAL LAWS. DON'T
INCINERATE CLOSED CONTAINERS, DISPOSE OF CLEANING CLOTHS AND EXCESS
PRODUCT IN CLOSED METAL CONTAINERS AWAY FROM IGNITION SOURCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.