BBPGY - LOKWELD 800

  • MSDS: BBPGY
  • Manufacturer: RALPH WILSON PLASTICS
  • Product Name: LOKWELD 800
  • National Stock Number: 8040-00F004003
Product Identification

Product ID:LOKWELD 800
MSDS Date:01/01/1987
FSC:8040
NIIN:00F004003
MSDS Number: BBPGY

Responsible Party
RALPH WILSON PLASTICS/TEMPLE, TEXAS 76501

Emergency Phone: (817) 778-2711

Cage: RALPH

Contractor
RALPH WILSON PLASTICS CO/TEMPLE, TX 76501

Cage: RALPH

Ingredients

MAGNESIUM OXIDE (SEE SUPPLEMENTAL FOR INGREDIENTS)

RTECS: OM2475000

Fraction By Weight: 5%

ACGIH TLV: 10 MG/CUM


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <30%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: <30%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 20 - 25%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 50%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:PROLONGED INHALATION MAY CAUSE HEADACHES,
NAUSEA, SHORTNESS OF BREATH, DROWSINESS.

First Aid

First Aid:INHALATION: REMOVE VICTIM TO FRESH AIR. USE APPROPRIATE
RESPIRATOR IF NECESSARY. INTERNAL: CALL PHYSICIAN IMMEDIATELY.
DON'T INDUCE VOMITING.

Fire Fighting

Flash Point:15F TOC
Lower Limits:2%
Upper Limits:13%
Extinguishing Media:CO2, FOAM, SAND
Fire Fighting Procedures:ALL SOLVENTS ARE FLAMMABLE
Unusual Fire/Explosion Hazard:NEOPRENE GIVES OFF HCL WHEN BURNED.

Accidental Release

Spill Release Procedures:APPLY SAWDUST OR SIMILAR MATERIAL TO SPILL
AREA TO CONTAIN. SCOOP UP SPILL AND PUT IO SUITABLE CONTAINER. IF
NECESSARY, USE SOLVENT TO REMOVE REMAINDER OF AESIVE.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH EYEES OR SKIN.
AVOID BREATHING VAPORS.
Other Precautions:STORE AND USE ONLY IN WELL-VENTILATED AREAS: ALL
ELECTRICAL EQUIPMENT IN AREA SHOULD BE EXPLOSION-PROOF.

Exposure Controls

Respiratory Protection:ORGANIC VAPORS, FULL-FACE RESPIRATOR-ONLY IF NOT
O2 DEFICIENT
Ventilation:MECHANCAL: PREFERRED
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED: 14 NOV 1985. ALSO CONTAINS: NEOPRENE (EI9660000) 10%,
PHENOLIC RESINS (1001141PR) 5%.

Chemical Properties

Boiling Pt:B.P. Text:132-143F
Vapor Pres:185
Spec Gravity:0.822
Evaporation Rate & Reference:(N-BU AC = 1) 7.7
Solubility in Water:SOLUBLE
Appearance and Odor:VISCOS LIQUID, STRONG KETONE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS AND OPEN FLAMES
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:DISPOSE OF AS SOLID WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.