Product ID:ANCHOR PAINT - 1723-A
MSDS Date:01/01/1987
FSC:8010
NIIN:00F004012
MSDS Number: BBPHK

ANCHOR PAINT MFG/TULSA, OK 74112

Emergency Phone: (918) 836-4626

Cage: 0E220

ANCHOR PAINT MFG CO INC

1305 TULSA, OK 74101 US

Telephone: 918-836-4626

Cage: 0E220

WATER (SEE SUPPLEMENTAL FOR INGREDIENTS)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 10%

PHOSPHORIC ACID (SARA III)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: 20%

OSHA PEL 1 MG/M3/3 STEL

ACGIH TLV: 1 MG/M3/3 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ALCOHOL

Fraction By Weight: 70%

ACGIH TLV: 50 PPM

Effects of Overexposure:LIQUID IS HARMFUL/FATAL IF SWALLOWED. EXCESSIVE
INHALATION CAUSE HEADACHE, DIZZINESS AND NAUSEA.

First Aid:IF OVERCOME BY VAPORS, REMOVE VICTIM FROM CONTAMINATED AREA,
KEEP VICTIM WARM/QUIET; IF BREATHING HAS STOPPED, GIVE ARTIFICIAL
RESPIRATION. CALL PHYSICIAN IMMEDIATELY. EYE CONTACT: FLUSH
W/WATER; WASH SKIN WITH MILD SOAP AND WATER.

Flash Point:99F TOC
Lower Limits:1.73
Upper Limits:10.7
Extinguishing Media:DRY CHEMICAL, CO2, CLASS "B" FIRES
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:IGNITES EASILY - FLAMMABLE

Spill Release Procedures:MATERIAL IS FLAMM/CARE SHOULD BE EXERCISED TO
PREV. FIRE. SPILLED MATERIAL MAY BE PUED INTO ANOTHER
CONTAINER/ABSORBED/REMOVE FROM THE AREA. ALL SPARKS/FLAM/IGNITION
SOURCES SHOULD BE KEPT OUT OF AREA . NON-SPARKING TOOLS SHOULD
USED.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. DON'T STORE OR
USE NEAR HEAT, SPARKS OR FLAME. KEEP IN COOL DRY PLACE. OID
BREATHING VAPORS.
Other Precautions:GROUND ALL CONTAINERS WHEN TRANSFERRING LIQUID. AVOID
PROLONGED CONTACT WITH SKIN.

Respiratory Protection:SELF-CONTAINED OR SUPPLY AIR MASKS FOR ENTERING
AREA OF CONC. VAPOR.
Ventilation:USE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:CHEM. RESISTANT
Eye Protection:GOGGLES
Other Protective Equipment:EYE BATH AND SAFETY SHOWER.
Supplemental Safety and Health
ALSO CONTAINS: LEAD FREE.

Boiling Pt:B.P. Text:244F
Vapor Pres:5.5
Vapor Density:2.55
Spec Gravity:0.8
Evaporation Rate & Reference:(ETHYL ETHER=1)0.5
Solubility in Water:7.9%
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXPLOSIVE/COMBUSTIBLE MIXTURES WITH AIR OR
OXYGEN. _
Hazardous Decomposition Products:COMBUSTION PRODUCTS ARE CO2 AND OXYGEN
Conditions to Avoid Polymerization:DOESN'T HEAD SPONTANEOUSLY.

Waste Disposal Methods:INCINERATION OR DISPOSE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.