BBPJY - ANSUL 3% REG PROTEIN FOAM CONC-LOW TEMP

  • MSDS: BBPJY
  • Manufacturer: ANSUL
  • Product Name: ANSUL 3% REG PROTEIN FOAM CONC-LOW TEMP
  • National Stock Number: 4210-00F004046
Product Identification

Product ID:ANSUL 3% REG PROTEIN FOAM CONC-LOW TEMP
MSDS Date:01/01/1987
FSC:4210
NIIN:00F004046
MSDS Number: BBPJY

Responsible Party
ANSUL/MARINETTE, WI 54143

Emergency Phone: (715) 735-7411

Cage: EO780

Contractor
ANSUL/MARINETTE, WI 54143
MARINETTE, WI 54143-2542 US

Telephone: 715-735-7411

Cage: EO780

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <12%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


HEXYLENE GLYCOL

RTECS: SA0108000

Fraction By Weight: <17%

ACGIH TLV: 25 PPM


PROTEIN HYDROLYSATE

Fraction By Weight: <70%.


GLYCOL SOLVENTS

Fraction By Weight: <70%.


FLUOROSURFACTANTS

Fraction By Weight: <70%.

Hazards

Effects of Overexposure:IRRITATION OF THE EYES, SKIN AND MUCOUS
MEMBRANES.

First Aid

First Aid:EYE CONTACT: FLUSH W/WATER; IF IRRITATION PERSISTS, SEEK
MEDICAL ATTENTION. SKIN CONTACT: WASH W/SOAP & WATER. INHALATION:
REMOVE VICTIM TO FRESH AIR. INGESTION: IF PATIENT IS CONSCIOUS,
GIVE LARGE AM OUNTS OF WATER/INDUCE VOMITING. SEEK MED HELP.

Fire Fighting

Flash Point:NONE TO BOILING
Fire Fighting Procedures:THIS IS AN EXTINGUISHING AGENT
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:RINSE FLOOR THOROUGHLY WITH WATER AS MATERIAL
IS SLIPPERY. PREVENT MATERIAL FROM REAING SEWERS OR WATERWAYS TO
AVOID NUISANCE FOAMING.

Handling

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINER.
Other Precautions:DON'T MIX AGENTS. AVOID SKIN AND EYE CONTACT.

Exposure Controls

Respiratory Protection:NOT NORMALLY NECESSARY.
Ventilation:MECHANICAL: RECOMMENDED
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:EYE WASH AND SAFETY SHOWERS ARE GOOD SAFETY
PRACTICE.
Supplemental Safety and Health
MSDS DATED: 01 JUN 1986. ALSO CONTAINS: DICHLOROPHENE (SM0175000)
<0.02%, INORGANIC SALTS (1000201IS) <70.9%, WATER (ZC01100) <70.9%.

Chemical Properties

Boiling Pt:B.P. Text:102F
Vapor Density:1
Spec Gravity:1.12
Evaporation Rate & Reference:(BU AC = 1) 0.37
Solubility in Water:100%
Appearance and Odor:RED/BROWN OPAQUE LIQUID, MILDLY PUNGENT ODOR.
Percent Volatiles by Volume:70

Stability

Stability Indicator/Materials to Avoid:YES
REACTIVE METALS/MATERIALS WHICH REACT WITH WATER. _
Stability Condition to Avoid:ELECTRICALLY ENERGIZED EQUIPMENT

Disposal

Waste Disposal Methods:DISPOSE OF IN COMPLIANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.