BBPKZ - ANSUL 3% REGULAR PROTEIN FOAM CONCENTRATE

  • MSDS: BBPKZ
  • Manufacturer: ANSUL
  • Product Name: ANSUL 3% REGULAR PROTEIN FOAM CONCENTRATE
  • National Stock Number: 4210-00F004070
Product Identification

Product ID:ANSUL 3% REGULAR PROTEIN FOAM CONCENTRATE
MSDS Date:01/01/1987
FSC:4210
NIIN:00F004070
MSDS Number: BBPKZ

Responsible Party
ANSUL/MARINETTE, WI 54143

Emergency Phone: (715) 735-7411

Cage: EO780

Contractor
ANSUL/MARINETTE, WI 54143
MARINETTE, WI 54143-2542 US

Telephone: 715-735-7411

Cage: EO780

Ingredients

HEXYLENE GLYCOL (SEE SUPPLEMENTAL FOR INGREDIENTS)

RTECS: SA0108000

Fraction By Weight: 7%

ACGIH TLV: 25 PPM


DICHLOROPHENE

CAS: 97-23-4

RTECS: SM0175000

Fraction By Weight: .02%


PROTEIN HYDROLYSATE

Fraction By Weight: <92%.


FLUOROSURFACTANTS

Fraction By Weight: <92%.


GLYCOL SOLVENTS

Fraction By Weight: <92%.

Hazards

Effects of Overexposure:IRRITATING OF THE EYES, SKIN & RESPIRATORY
TRACT. UPON INGESTION - NAUSEA, VOMITING & NARCOSIS.

First Aid

First Aid:EYE CONTACT: IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15
MINUTES. SKIN CONTACT: WASH W/WATER. INHALATION: REMOVE VICTIM TO
FRESH AIR. INGESTION: IF PATIENT IS CONSCIOUS, GIVE NO MORE THAN 2
GLASSES OF W ATER/INDUCE VOMITING. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:NONE
Fire Fighting Procedures:THIS IS AN EXTINGUISHING AGENT
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:RINSE FLOOR THOROUGHLY W/WATER AS MATERIAL IS
SLIPPERY. PREVENT MATERIAL FROM REACHI SEWERS OR WATERWAYS TO AVOID
NUISANCE FOAMING.

Handling

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINERS.
Other Precautions:DON'T MIX AGENTS. AVOID SKIN/EYE CONTACT. AVOID
INGESTION. AVOID BREATHING VAPORS IF GENERATED.

Exposure Controls

Respiratory Protection:ORGANIC VAPORS RESP. IN ABSENCE OF ENVIRONMENT
CONTROLS.
Ventilation:MECHANICAL: RECOMMENDED
Protective Gloves:PLASTIC
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:EYE WASH/SAFETY SHOWERS ARE GOOD SAFETY
PRACTICE.
Supplemental Safety and Health
MSDS DATE: 01 JUN 1986. ALSO CONTAINS: INORGANIC SALTS (1000201IS)
<92.9%, WATER (ZC0110000) <92.9%.

Chemical Properties

Boiling Pt:B.P. Text:101F
Vapor Density:<1
Spec Gravity:1.14
Evaporation Rate & Reference:(BU AC = 1) 0.36
Solubility in Water:100%
Appearance and Odor:RED/BROWN OPAQUE LIQUID, MILDLY PUNGENT ODOR
Percent Volatiles by Volume:70%

Stability

Stability Indicator/Materials to Avoid:YES
REACTIVE METALS, ANY MATERIALS REACTIVE WITH WATER.
Stability Condition to Avoid:ELECTRICALLY ENERGIZED EQUIPMENT

Disposal

Waste Disposal Methods:DISPOSE OF IN COMPLIANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.